PartsTable
Technical Data Sheet
Download PDF

3M298C7 — NUT,PLAIN,HEXAGON

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

3M298C7: NUT,PLAIN,HEXAGON.

The NUT,PLAIN,HEXAGON is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING OVERALL, nut_style: HEXAGON, nut_height: 0.281 INCHES NOMINAL IN, temp_rating: 450.0 FAHRENHEIT MINIMUM AND 800.0 FAHRENHEIT MAXIMUM DEGF, thread_class: 3B, thread_series: UNF. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-612-6174, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
3M298C7
NSN: 5310-00-612-6174
FSC: 5310 — Nuts and Washers
CAGE: 76301 — THE BOEING COMPANY DIV DEFENSE (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING OVERALL
nut_styleHEXAGON
nut_height0.281 INCHES NOMINAL IN
temp_rating450.0 FAHRENHEIT MINIMUM AND 800.0 FAHRENHEIT MAXIMUM DEGF
thread_class3B
thread_seriesUNF
hardness_rating88.0 ROCKWELL B MINIMUM
thread_directionRIGHT-HAND
countersink_angle110.0 DEGREES NOMINAL NUT
surface_treatmentPASSIVATE OVERALL
width_across_flats0.615 INCHES MINIMUM AND 0.627 INCHES MAXIMUM IN
nominal_thread_size0.438 INCHES IN
NSN5310-00-612-6174
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 3M298C7 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.615 INCHES MINIMUM AND 0.627 INCHES MAXIMUM IN
•
THREAD SERIES: UNF
•
TEMP RATING: 450.0 FAHRENHEIT MINIMUM AND 800.0 FAHRENHEIT MAXIMUM DEGF
•
HARDNESS RATING: 88.0 ROCKWELL B MINIMUM
•
HOLE CONFIGURATION STYLE: CONFIGURATION B
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.438 INCHES IN
•
NUT HEIGHT: 0.281 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.615 INCHES MINIMUM AND 0.627 INCHES MAXIMUM IN
THREAD SERIESUNF
TEMP RATING450.0 FAHRENHEIT MINIMUM AND 800.0 FAHRENHEIT MAXIMUM DEGF
HARDNESS RATING88.0 ROCKWELL B MINIMUM
HOLE CONFIGURATION STYLECONFIGURATION B
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.438 INCHES IN
NUT HEIGHT0.281 INCHES NOMINAL IN
DRILLED HOLE DIAMETER0.046 INCHES NOMINAL IN
SURFACE TREATMENTPASSIVATE OVERALL
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 3M298C7?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 3M298C7?
3M298C7 is a NUT,PLAIN,HEXAGON.
What is the NSN for 3M298C7?
3M298C7 is cataloged in the U.S. Government catalog under NSN 5310-00-612-6174. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 3M298C7