PartsTable
Technical Data Sheet
Download PDF

3M250A08-7 — PIN-RIVET

✓ Government record, cited
— · COMPONENT
PRODUCT OVERVIEW

3M250A08-7: PIN-RIVET.

The PIN-RIVET is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, head_style: FLUSH COUNTERSUNK, grip_length: 0.437 INCHES NOMINAL IN, shank_style: PIN-RIVET, STRAIGHT, THREADED, thread_class: 3A A, heat_treatment: AS FABRICATED OVERALL. This part is cataloged in the U.S.

Government catalog under NSN 5320-00-762-0920, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
3M250A08-7
NSN: 5320-00-762-0920
FSC: 5320 — Rivets
CAGE: 76301 — THE BOEING COMPANY DIV DEFENSE (USA)
SPECIFICATIONS
materialSTEEL OVERALL
head_styleFLUSH COUNTERSUNK
grip_length0.437 INCHES NOMINAL IN
shank_stylePIN-RIVET, STRAIGHT, THREADED
thread_class3A A
heat_treatmentAS FABRICATED OVERALL
shank_diameter0.163 INCHES MINIMUM AND 0.164 INCHES MAXIMUM IN
fastener_length0.779 INCHES NOMINAL IN
thread_directionRIGHT-HAND
countersink_angle100.0 DEGREES NOMINAL
surface_treatmentCADMIUM OVERALL
head_major_diameter0.326 INCHES MINIMUM AND 0.330 INCHES MAXIMUM IN
NSN5320-00-762-0920
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available PIN-RIVET TITLE COMPONENT PN 3M250A08-7 MFR PIN-RIVET
KEY FEATURES
•
SHANK DIAMETER: 0.163 INCHES MINIMUM AND 0.164 INCHES MAXIMUM IN
•
FASTENER LENGTH: 0.779 INCHES NOMINAL IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
HEAT TREATMENT: AS FABRICATED OVERALL
•
HEAD STYLE: FLUSH COUNTERSUNK
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.164 INCHES IN
•
GRIP LENGTH: 0.437 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
SHANK DIAMETER0.163 INCHES MINIMUM AND 0.164 INCHES MAXIMUM IN
FASTENER LENGTH0.779 INCHES NOMINAL IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
HEAT TREATMENTAS FABRICATED OVERALL
HEAD STYLEFLUSH COUNTERSUNK
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.164 INCHES IN
GRIP LENGTH0.437 INCHES NOMINAL IN
WIDTH BETWEEN FLATS0.080 INCHES MINIMUM AND 0.081 INCHES MAXIMUM IN
SHANK STYLEPIN-RIVET, STRAIGHT, THREADED
SUBSTITUTES & CROSS-REFERENCES 1
HL553-5-7Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 3M250A08-7?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 3M250A08-7?
3M250A08-7 is a PIN-RIVET.
What parts can replace 3M250A08-7?
There is 1 known substitute for 3M250A08-7: HL553-5-7. Substitute compatibility should be verified for your specific system.
What is the NSN for 3M250A08-7?
3M250A08-7 is cataloged in the U.S. Government catalog under NSN 5320-00-762-0920. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 3M250A08-7

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.