PartsTable
Technical Data Sheet
Download PDF

3M1315-502 — PIN,SHOULDER,HEADLESS

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

3M1315-502: PIN,SHOULDER,HEADLESS.

The PIN,SHOULDER,HEADLESS is a the manufacturer industrial component. Key specifications include material: COBALT COMP MP-35-N OVERALL, shank_length: 0.844 INCHES NOMINAL IN, thread_class: 3A A, thread_length: 0.469 INCHES NOMINAL IN, overall_length: 1.531 INCHES NOMINAL IN, shank_diameter: 0.3115 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5315-01-718-7926, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
3M1315-502
NSN: 5315-01-718-7926
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 76301 — THE BOEING COMPANY DIV DEFENSE (USA)
SPECIFICATIONS
materialCOBALT COMP MP-35-N OVERALL
shank_length0.844 INCHES NOMINAL IN
thread_class3A A
thread_length0.469 INCHES NOMINAL IN
overall_length1.531 INCHES NOMINAL IN
shank_diameter0.3115 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM IN
first_end_styleCHAMFERED
second_end_styleCHAMFERED
style_designatorSHOULDER
thread_directionRIGHT-HAND
first_end_locationTHREADED END
nominal_thread_size0.3125 INCHES IN
NSN5315-01-718-7926
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 3M1315-502 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SHANK DIAMETER: 0.3115 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM IN
•
SECOND SHANK DIAMETER: 0.3120 INCHES MINIMUM AND 0.3125 INCHES MAXIMUM IN
•
FIRST END TAPER LENGTH: 0.040 INCHES NOMINAL IN
•
FIRST END LOCATION: THREADED END
•
THREAD LENGTH: 0.469 INCHES NOMINAL IN
•
FIRST END STYLE: CHAMFERED
•
SHANK LENGTH: 0.844 INCHES NOMINAL IN
•
STYLE DESIGNATOR: SHOULDER
TECHNICAL CHARACTERISTICS
SHANK DIAMETER0.3115 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM IN
SECOND SHANK DIAMETER0.3120 INCHES MINIMUM AND 0.3125 INCHES MAXIMUM IN
FIRST END TAPER LENGTH0.040 INCHES NOMINAL IN
FIRST END LOCATIONTHREADED END
THREAD LENGTH0.469 INCHES NOMINAL IN
FIRST END STYLECHAMFERED
SHANK LENGTH0.844 INCHES NOMINAL IN
STYLE DESIGNATORSHOULDER
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 5844 AEROSPACE MATERIAL SPEC STD SINGLE MATERIAL RESPONSE OVERALL
OVERALL LENGTH1.531 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 1
3M1315Reference document
Same NSN cross-reference
Reference document — Drawing number reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 3M1315-502?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 3M1315-502?
3M1315-502 is a PIN,SHOULDER,HEADLESS.
What parts can replace 3M1315-502?
There is 1 known substitute for 3M1315-502: 3M1315. Substitute compatibility should be verified for your specific system.
What is the NSN for 3M1315-502?
3M1315-502 is cataloged in the U.S. Government catalog under NSN 5315-01-718-7926. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 3M1315-502