PartsTable
Technical Data Sheet
Download PDF

3M1262D5D16-5A — SCREW,CLOSE TOLERANCE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

3M1262D5D16-5A: SCREW,CLOSE TOLERANCE.

The SCREW,CLOSE TOLERANCE is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING OVERALL, head_style: FLAT COUNTERSUNK, grip_length: 1.000 INCHES NOMINAL IN, thread_class: 3A A, grip_diameter: 0.312 INCHES NOMINAL IN, head_diameter: 0.438 INCHES MINIMUM AND 0.445 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-01-468-9141, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
3M1262D5D16-5A
NSN: 5305-01-468-9141
FSC: 5305 — Screws
CAGE: 76301 — THE BOEING COMPANY DIV DEFENSE (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING OVERALL
head_styleFLAT COUNTERSUNK
grip_length1.000 INCHES NOMINAL IN
thread_class3A A
grip_diameter0.312 INCHES NOMINAL IN
head_diameter0.438 INCHES MINIMUM AND 0.445 INCHES MAXIMUM IN
thread_length0.312 INCHES NOMINAL IN
fastener_length1.282 INCHES MINIMUM AND 1.312 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
countersink_angle99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
surface_treatmentALUMINUM OVERALL
internal_drive_styleTORX
NSN5305-01-468-9141
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 3M1262D5D16-5A · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SPLINE MINOR DIAMETER: 0.1570 INCHES NOMINAL IN
•
FASTENER LENGTH: 1.282 INCHES MINIMUM AND 1.312 INCHES MAXIMUM IN
•
THREAD LENGTH: 0.312 INCHES NOMINAL IN
•
CRITICALITY CODE JUSTIFICATION: AGAV
•
SPLINE MAJOR DIAMETER: 0.1600 INCHES NOMINAL IN
•
NOMINAL THREAD DIAMETER: 0.312 INCHES IN
•
HEAD STYLE: FLAT COUNTERSUNK
•
THREAD DIRECTION: RIGHT-HAND
TECHNICAL CHARACTERISTICS
SPLINE MINOR DIAMETER0.1570 INCHES NOMINAL IN
FASTENER LENGTH1.282 INCHES MINIMUM AND 1.312 INCHES MAXIMUM IN
THREAD LENGTH0.312 INCHES NOMINAL IN
CRITICALITY CODE JUSTIFICATIONAGAV
SPLINE MAJOR DIAMETER0.1600 INCHES NOMINAL IN
NOMINAL THREAD DIAMETER0.312 INCHES IN
HEAD STYLEFLAT COUNTERSUNK
THREAD DIRECTIONRIGHT-HAND
GRIP LENGTH1.000 INCHES NOMINAL IN
GRIP DIAMETER0.312 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 3
HP1262D5D16-5Reference document
Same NSN cross-reference
Reference document — Secondary reference
TX1024D5D16-5AReference document
Same NSN cross-reference
Reference document — Secondary reference
11853D5D16-5ASame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 3M1262D5D16-5A?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 3M1262D5D16-5A?
3M1262D5D16-5A is a SCREW,CLOSE TOLERANCE.
What parts can replace 3M1262D5D16-5A?
There are 3 known substitutes for 3M1262D5D16-5A: HP1262D5D16-5, TX1024D5D16-5A, 11853D5D16-5A. Substitute compatibility should be verified for your specific system.
What is the NSN for 3M1262D5D16-5A?
3M1262D5D16-5A is cataloged in the U.S. Government catalog under NSN 5305-01-468-9141. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 3M1262D5D16-5A

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.