PartsTable
Technical Data Sheet
Download PDF

3M123-4-8 — SCREW,CLOSE TOLERANCE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

3M123-4-8: SCREW,CLOSE TOLERANCE.

The SCREW,CLOSE TOLERANCE is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING OVERALL, head_style: FLAT COUNTERSUNK, grip_length: 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN, thread_class: 3A A, grip_diameter: 0.2490 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM IN, head_diameter: 0.501 INCHES MINIMUM AND 0.506 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-347-8291, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
3M123-4-8
NSN: 5305-00-347-8291
FSC: 5305 — Screws
CAGE: 76301 — THE BOEING COMPANY DIV DEFENSE (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING OVERALL
head_styleFLAT COUNTERSUNK
grip_length0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
thread_class3A A
grip_diameter0.2490 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM IN
head_diameter0.501 INCHES MINIMUM AND 0.506 INCHES MAXIMUM IN
thread_length0.443 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
surface_finish32.0 MICROINCHES THREADS
fastener_length0.953 INCHES MINIMUM AND 1.000 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
countersink_angle100.0 DEGREES MINIMUM
internal_drive_styleHIGH-TORQUE
NSN5305-00-347-8291
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 3M123-4-8 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE FINISH: 32.0 MICROINCHES THREADS
•
FASTENER LENGTH: 0.953 INCHES MINIMUM AND 1.000 INCHES MAXIMUM IN
•
THREAD LENGTH: 0.443 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
•
NOMINAL THREAD DIAMETER: 0.250 INCHES IN
•
HEAD STYLE: FLAT COUNTERSUNK
•
THREAD DIRECTION: RIGHT-HAND
•
GRIP LENGTH: 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
SURFACE FINISH32.0 MICROINCHES THREADS
SURFACE FINISH32.0 MICROINCHES GRIP
FASTENER LENGTH0.953 INCHES MINIMUM AND 1.000 INCHES MAXIMUM IN
THREAD LENGTH0.443 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
NOMINAL THREAD DIAMETER0.250 INCHES IN
HEAD STYLEFLAT COUNTERSUNK
THREAD DIRECTIONRIGHT-HAND
GRIP LENGTH0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
GRIP DIAMETER0.2490 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM IN
INTERNAL DRIVE STYLEHIGH-TORQUE
OTHER ITEMS IN FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-000-0094 5305-00-000-1397 5305-00-000-2625 5305-00-000-3669 5305-00-000-3830 5305-00-000-3831
SUBSTITUTES & CROSS-REFERENCES 2
54291-4-8Reference document
Same NSN cross-reference
Reference document — Secondary reference
HT1029A4-8Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 3M123-4-8?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 3M123-4-8?
3M123-4-8 is a SCREW,CLOSE TOLERANCE.
What parts can replace 3M123-4-8?
There are 2 known substitutes for 3M123-4-8: 54291-4-8, HT1029A4-8. Substitute compatibility should be verified for your specific system.
What is the NSN for 3M123-4-8?
3M123-4-8 is cataloged in the U.S. Government catalog under NSN 5305-00-347-8291. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 3M123-4-8

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.