PartsTable
Technical Data Sheet
Download PDF

3M1169 — SCREW,CLOSE TOLERANCE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

3M1169: SCREW,CLOSE TOLERANCE.

The SCREW,CLOSE TOLERANCE is a the manufacturer industrial component. Key specifications include material: NICKEL ALLOY 718 OVERALL, head_style: FLAT COUNTERSUNK, grip_length: 0.9275 INCHES MINIMUM AND 0.9475 INCHES MAXIMUM IN, head_height: 0.084 INCHES NOMINAL IN, point_style: FLAT, thread_class: 3A A. This part is cataloged in the U.S.

Government catalog under NSN 5305-01-694-4906, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
3M1169
NSN: 5305-01-694-4906
NIINs: 016944906, 017183311, 017280580
FSC: 5305 — Screws
CAGE: 76301 — THE BOEING COMPANY DIV DEFENSE (USA)
SPECIFICATIONS
materialNICKEL ALLOY 718 OVERALL
head_styleFLAT COUNTERSUNK
grip_length0.9275 INCHES MINIMUM AND 0.9475 INCHES MAXIMUM IN
head_height0.084 INCHES NOMINAL IN
point_styleFLAT
thread_class3A A
grip_diameter0.1890 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM IN
head_diameter0.3729 INCHES MINIMUM AND 0.3813 INCHES MAXIMUM IN
thread_length0.345 INCHES NOMINAL IN
fastener_length1.2675 INCHES MINIMUM AND 1.2975 INCHES MAXIMUM IN
special_features125 KSI ULTIMATE SHEAR STRENGTH
thread_directionRIGHT-HAND
NSN5305-01-694-4906
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 3M1169 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FASTENER LENGTH: 0.455 INCHES MINIMUM AND 0.485 INCHES MAXIMUM IN
•
THREAD LENGTH: 0.345 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS5662 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
SPLINE MAJOR DIAMETER: 0.151 INCHES NOMINAL IN
•
NOMINAL THREAD DIAMETER: 0.1900 INCHES IN
•
HEAD STYLE: FLAT COUNTERSUNK
•
THREAD DIRECTION: RIGHT-HAND
•
GRIP LENGTH: 0.125 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
FASTENER LENGTH0.455 INCHES MINIMUM AND 0.485 INCHES MAXIMUM IN
THREAD LENGTH0.345 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONAMS5662 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
SPLINE MAJOR DIAMETER0.151 INCHES NOMINAL IN
NOMINAL THREAD DIAMETER0.1900 INCHES IN
HEAD STYLEFLAT COUNTERSUNK
THREAD DIRECTIONRIGHT-HAND
GRIP LENGTH0.125 INCHES NOMINAL IN
GRIP DIAMETER0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM IN
SURFACE TREATMENTALUMINUM OVERALL
SUBSTITUTES & CROSS-REFERENCES 1
TX1026C3-2AFSame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 3M1169?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 3M1169?
3M1169 is a SCREW,CLOSE TOLERANCE.
What parts can replace 3M1169?
There is 1 known substitute for 3M1169: TX1026C3-2AF. Substitute compatibility should be verified for your specific system.
What is the NSN for 3M1169?
3M1169 is cataloged in the U.S. Government catalog under NSN 5305-01-694-4906. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 3M1169

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.