3M1150-3-9 — PIN-RIVET

✓ Government record, cited

— · COMPONENT

PRODUCT OVERVIEW

3M1150-3-9: PIN-RIVET.

The PIN-RIVET is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING OVERALL, head_style: FLAT CHAMFER, grip_length: 0.557 INCHES MINIMUM AND 0.567 INCHES MAXIMUM IN, head_height: 0.045 INCHES MINIMUM AND 0.055 INCHES MAXIMUM IN, shank_style: PIN-RIVET, STRAIGHT, THREADED, thread_class: 3A A. This part is cataloged in the U.S.

Government catalog under NSN 5320-01-263-6833, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

3M1150-3-9

NSN: 5320-01-263-6833
FSC: 5320 — Rivets
CAGE: 17446 — HUCK INTERNATIONAL, INC (USA)

SPECIFICATIONS

material	STEEL CORROSION RESISTING OVERALL
head_style	FLAT CHAMFER
grip_length	0.557 INCHES MINIMUM AND 0.567 INCHES MAXIMUM IN
head_height	0.045 INCHES MINIMUM AND 0.055 INCHES MAXIMUM IN
shank_style	PIN-RIVET, STRAIGHT, THREADED
thread_class	3A A
shank_diameter	0.1890 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM IN
shear_strength	125000 SINGLE POUNDS PER SQUARE INCH
fastener_length	0.877 INCHES MINIMUM AND 0.897 INCHES MAXIMUM IN
special_features	HOLE THRU SHANK AT THREADED END,0.076 IN. MIN,0.086 IN. MAX DIA IN
thread_direction	RIGHT-HAND
surface_treatment	PASSIVATE OVERALL
NSN	5320-01-263-6833

COMPONENT DIAGRAM

KEY FEATURES

•

SHANK DIAMETER: 0.1890 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM IN

•

HEAD HEIGHT: 0.045 INCHES MINIMUM AND 0.055 INCHES MAXIMUM IN

•

FASTENER LENGTH: 0.877 INCHES MINIMUM AND 0.897 INCHES MAXIMUM IN

•

SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL

•

HEAD STYLE: FLAT CHAMFER

•

THREAD DIRECTION: RIGHT-HAND

•

NOMINAL THREAD SIZE: 0.190 INCHES IN

•

GRIP LENGTH: 0.557 INCHES MINIMUM AND 0.567 INCHES MAXIMUM IN

TECHNICAL CHARACTERISTICS

SHANK DIAMETER	0.1890 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM IN
HEAD HEIGHT	0.045 INCHES MINIMUM AND 0.055 INCHES MAXIMUM IN
FASTENER LENGTH	0.877 INCHES MINIMUM AND 0.897 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
HEAD STYLE	FLAT CHAMFER
THREAD DIRECTION	RIGHT-HAND
NOMINAL THREAD SIZE	0.190 INCHES IN
GRIP LENGTH	0.557 INCHES MINIMUM AND 0.567 INCHES MAXIMUM IN
WIDTH BETWEEN FLATS	0.0791 INCHES MINIMUM AND 0.0806 INCHES MAXIMUM IN
SHANK STYLE	PIN-RIVET, STRAIGHT, THREADED

OTHER ITEMS IN FSC 5320 — Rivets

Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.

5320-00-001-1756 5320-00-001-2042 5320-00-001-3944 5320-00-001-5126 5320-00-001-5151 5320-00-001-5152 5320-00-001-5153

SUBSTITUTES & CROSS-REFERENCES 1

VS3425-6-9Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy 3M1150-3-9?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 3M1150-3-9?

3M1150-3-9 is a PIN-RIVET.

What parts can replace 3M1150-3-9?

There is 1 known substitute for 3M1150-3-9: VS3425-6-9. Substitute compatibility should be verified for your specific system.

What is the NSN for 3M1150-3-9?

3M1150-3-9 is cataloged in the U.S. Government catalog under NSN 5320-01-263-6833. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

3M1150-3-9 — PIN-RIVET

Request a Quote — 3M1150-3-9