PartsTable
Technical Data Sheet
Download PDF

3M1034V5-13-25 — SCREW,CLOSE TOLERANCE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

3M1034V5-13-25: SCREW,CLOSE TOLERANCE.

The SCREW,CLOSE TOLERANCE is a the manufacturer industrial component. Key specifications include material: TITANIUM ALLOY UNS R56400 OVERALL, head_style: FLAT COUNTERSUNK, grip_length: 0.802 INCHES MINIMUM AND 0.822 INCHES MAXIMUM IN, thread_class: 3A A, grip_diameter: 0.3115 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM IN, head_diameter: 0.625 INCHES MINIMUM AND 0.635 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-01-216-9862, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
3M1034V5-13-25
NSN: 5305-01-216-9862
FSC: 5305 — Screws
CAGE: 76301 — THE BOEING COMPANY DIV DEFENSE (USA)
SPECIFICATIONS
materialTITANIUM ALLOY UNS R56400 OVERALL
head_styleFLAT COUNTERSUNK
grip_length0.802 INCHES MINIMUM AND 0.822 INCHES MAXIMUM IN
thread_class3A A
grip_diameter0.3115 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM IN
head_diameter0.625 INCHES MINIMUM AND 0.635 INCHES MAXIMUM IN
thread_length0.506 INCHES MINIMUM AND 0.556 INCHES MAXIMUM IN
fastener_length1.328 INCHES MINIMUM AND 1.358 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
countersink_angle99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
internal_drive_styleHIGH-TORQUE
nominal_thread_diameter0.312 INCHES IN
NSN5305-01-216-9862
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 3M1034V5-13-25 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FASTENER LENGTH: 1.328 INCHES MINIMUM AND 1.358 INCHES MAXIMUM IN
•
THREAD LENGTH: 0.506 INCHES MINIMUM AND 0.556 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS4928 ASSN STD SINGLE MATERIAL RESPONSE OR AMS4967 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
NOMINAL THREAD DIAMETER: 0.312 INCHES IN
•
HEAD STYLE: FLAT COUNTERSUNK
•
THREAD DIRECTION: RIGHT-HAND
•
GRIP LENGTH: 0.802 INCHES MINIMUM AND 0.822 INCHES MAXIMUM IN
•
GRIP DIAMETER: 0.3115 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
FASTENER LENGTH1.328 INCHES MINIMUM AND 1.358 INCHES MAXIMUM IN
THREAD LENGTH0.506 INCHES MINIMUM AND 0.556 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONAMS4928 ASSN STD SINGLE MATERIAL RESPONSE OR AMS4967 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER0.312 INCHES IN
HEAD STYLEFLAT COUNTERSUNK
THREAD DIRECTIONRIGHT-HAND
GRIP LENGTH0.802 INCHES MINIMUM AND 0.822 INCHES MAXIMUM IN
GRIP DIAMETER0.3115 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM IN
SPECIAL FEATURESTHD HOLE IN TOP OF HEAD 0.138-32 UNJC-3B THD,HOLE 0.300 IN. MIN. 0.345 IN. MAX DP,COUNTERBORE 0.145 IN. MIN. 0.150 IN. MAX DIA; INJECTION PORT 0.120 IN. LG,0.060 IN. WIDE IN UNTHD SHANK; DISTANCE FROM TOP OF HEAD TO BEGINNING OF INJECTION PORT 0.250 IN. IN
INTERNAL DRIVE STYLEHIGH-TORQUE
OTHER ITEMS IN FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-001-5016 5305-00-001-9160 5305-00-001-9629 5305-00-001-9742 5305-00-001-9768 5305-00-003-4306 5305-00-003-6694 5305-00-003-6753
SUBSTITUTES & CROSS-REFERENCES 2
HT4075V5-13-25Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
11839V5-13-25Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 3M1034V5-13-25?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 3M1034V5-13-25?
3M1034V5-13-25 is a SCREW,CLOSE TOLERANCE.
What parts can replace 3M1034V5-13-25?
There are 2 known substitutes for 3M1034V5-13-25: HT4075V5-13-25, 11839V5-13-25. Substitute compatibility should be verified for your specific system.
What is the NSN for 3M1034V5-13-25?
3M1034V5-13-25 is cataloged in the U.S. Government catalog under NSN 5305-01-216-9862. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 3M1034V5-13-25

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.