PartsTable
Technical Data Sheet
Download PDF

3M1034V4-9-20 — SCREW,CLOSE TOLERANCE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

3M1034V4-9-20: SCREW,CLOSE TOLERANCE.

The SCREW,CLOSE TOLERANCE is a the manufacturer industrial component. Key specifications include material: TITANIUM ALLOY UNS R56400 OVERALL, head_style: FLAT COUNTERSUNK, grip_length: 0.552 INCHES MINIMUM AND 0.572 INCHES MAXIMUM IN, thread_class: 3A A, grip_diameter: 0.2490 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM IN, head_diameter: 0.497 INCHES MINIMUM AND 0.507 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-01-216-1340, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
3M1034V4-9-20
NSN: 5305-01-216-1340
NIINs: 012161340, 012495841
FSC: 5305 — Screws
CAGE: L4528 — LISI AEROSPACE CANADA CORP DIV HI SHEAR HOLDINGS INC (CAN)
SPECIFICATIONS
materialTITANIUM ALLOY UNS R56400 OVERALL
head_styleFLAT COUNTERSUNK
grip_length0.552 INCHES MINIMUM AND 0.572 INCHES MAXIMUM IN
thread_class3A A
grip_diameter0.2490 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM IN
head_diameter0.497 INCHES MINIMUM AND 0.507 INCHES MAXIMUM IN
thread_length0.444 INCHES MINIMUM AND 0.494 INCHES MAXIMUM IN
fastener_length1.016 INCHES MINIMUM AND 1.046 INCHES MAXIMUM IN
special_featuresTAPPED HOLE IN HEAD 0.1380-32,UNJC-3B THREADS; DISTANCE FROM HEAD TOP TO INJECTION PORT 0.200 IN.; INJECTION PORT 0.120 IN. LG,0.060 IN. W IN
thread_directionRIGHT-HAND
countersink_angle99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
internal_drive_styleHIGH-TORQUE
NSN5305-01-216-1340
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 3M1034V4-9-20 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FASTENER LENGTH: 0.954 INCHES MINIMUM AND 0.984 INCHES MAXIMUM IN
•
THREAD LENGTH: 0.444 INCHES MINIMUM AND 0.494 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS4928 ASSN STD SINGLE MATERIAL RESPONSE OR AMS4967 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
NOMINAL THREAD DIAMETER: 0.250 INCHES IN
•
HEAD STYLE: FLAT COUNTERSUNK
•
THREAD DIRECTION: RIGHT-HAND
•
GRIP LENGTH: 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
•
GRIP DIAMETER: 0.2490 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
FASTENER LENGTH0.954 INCHES MINIMUM AND 0.984 INCHES MAXIMUM IN
THREAD LENGTH0.444 INCHES MINIMUM AND 0.494 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONAMS4928 ASSN STD SINGLE MATERIAL RESPONSE OR AMS4967 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER0.250 INCHES IN
HEAD STYLEFLAT COUNTERSUNK
THREAD DIRECTIONRIGHT-HAND
GRIP LENGTH0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
GRIP DIAMETER0.2490 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM IN
SPECIAL FEATURESTHD HOLE IN TOP OF HEAD 0.138-32 UNJC-3B THD,HOLE 0.300 IN. MIN. 0.345 IN. MAX DP,COUNTERBORE 0.145 IN. MIN. 0.150 IN. MAX DIA; INJECTION PORT 0.120 IN. LG,0.060 IN. WIDE IN UNTHD SHANK; DISTANCE FROM TOP OF HEAD TO BEGINNING OF INJECTION PORT 0.200 IN. IN
INTERNAL DRIVE STYLEHIGH-TORQUE
SUBSTITUTES & CROSS-REFERENCES 3
3M1034V4-8-20Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
11839V4-8-20Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
HT4075V4-8-20Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 3M1034V4-9-20?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 3M1034V4-9-20?
3M1034V4-9-20 is a SCREW,CLOSE TOLERANCE.
What parts can replace 3M1034V4-9-20?
There are 3 known substitutes for 3M1034V4-9-20: 3M1034V4-8-20, 11839V4-8-20, HT4075V4-8-20. Substitute compatibility should be verified for your specific system.
What is the NSN for 3M1034V4-9-20?
3M1034V4-9-20 is cataloged in the U.S. Government catalog under NSN 5305-01-216-1340. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 3M1034V4-9-20

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.