PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 3L36
3L36 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include bore_shape: STRAIGHT, bore_diameter: 180.00 MILLIMETERS NOMINAL MM, overall_width: 46.00 MILLIMETERS NOMINAL MM, load_direction: RADIAL, surface_finish: GROUND, lubrication_material: LUBRICANT. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-144-8978, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
3L36
NSN: 3110-00-144-8978
FSC: 3110
CAGE: 7X677 — GENERAL MOTORS LLC DBA GENERAL MOTORS LLC (USA)
SPECIFICATIONS
bore_shapeSTRAIGHT
bore_diameter180.00 MILLIMETERS NOMINAL MM
overall_width46.00 MILLIMETERS NOMINAL MM
load_directionRADIAL
surface_finishGROUND
lubrication_materialLUBRICANT
overall_outside_diameter280.00 MILLIMETERS NOMINAL MM
internal_fit-up_designationSTANDARD
standard_tolerance_designationABEC NO.1
NSN3110-00-144-8978
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 3L36 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OVERALL OUTSIDE DIAMETER: 280.00 MILLIMETERS NOMINAL MM
•
SURFACE FINISH: GROUND
•
LOAD DIRECTION: RADIAL
•
STANDARD TOLERANCE DESIGNATION: ABEC NO.1
•
BORE SHAPE: STRAIGHT
•
LUBRICATION MATERIAL: LUBRICANT
•
INTERNAL FIT-UP DESIGNATION: STANDARD
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL OUTSIDE DIAMETER280.00 MILLIMETERS NOMINAL MM
SURFACE FINISHGROUND
LOAD DIRECTIONRADIAL
STANDARD TOLERANCE DESIGNATIONABEC NO.1
BORE SHAPESTRAIGHT
LUBRICATION MATERIALLUBRICANT
INTERNAL FIT-UP DESIGNATIONSTANDARD
OVERALL WIDTH46.00 MILLIMETERS NOMINAL MM
BORE DIAMETER180.00 MILLIMETERS NOMINAL MM
VERIFIED SUBSTITUTES & CROSS-REFERENCES 9
700224Interchangeable
interchangeable cross-reference
interchangeable
694037-103Interchangeable
interchangeable cross-reference
interchangeable
322-1007P2Interchangeable
interchangeable cross-reference
interchangeable
70NA6809Interchangeable
interchangeable cross-reference
interchangeable
NA6809PC70Interchangeable
interchangeable cross-reference
interchangeable
XNM-SMInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 3L36?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 3L36?
3L36 is a BEARING,BALL,ANNULAR.
What parts can replace 3L36?
There are 9 known substitutes for 3L36: 700224, 694037-103, 322-1007P2 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 3L36?
3L36 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-144-8978. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 3L36

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026