Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, bore_shape: STRAIGHT, bore_diameter: 55.00 MILLIMETERS NOMINAL MM, overall_width: 18.00 MILLIMETERS NOMINAL MM, load_direction: RADIAL, surface_finish: GROUND. This product is currently in active production with full OEM support.
This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-305-2943, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
3L1-1
NSN:5340-00-305-2943 FSC:5340 CAGE:71286 — HOWMET GLOBAL FASTENING SYSTEMS INC DIV CAMLOC PRODUCTS (USA)
SPECIFICATIONS
material
STEEL OVERALL
bore_shape
STRAIGHT
bore_diameter
55.00 MILLIMETERS NOMINAL MM
overall_width
18.00 MILLIMETERS NOMINAL MM
load_direction
RADIAL
surface_finish
GROUND
style_designator
NON-LOADING GROOVE, NON-SEPARABLE
overall_outside_diameter
90.00 MILLIMETERS NOMINAL MM
internal_fit-up_designation
STANDARD
retainer_fabrication_method
PRESSED
standard_tolerance_designation
ABEC NO.1
NSN
5340-00-305-2943
COMPONENT DIAGRAM
KEY FEATURES
•
LEVER OFFSET DISTANCE: 0.150 INCHES NOMINAL IN
•
MATERIAL: UNABLE TO DECODE
•
MOUNTING HOLE DIAMETER: 0.126 INCHES MINIMUM AND 0.134 INCHES MAXIMUM IN
•
LENGTH: 6.190 INCHES NOMINAL IN
•
CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH: 0.911 INCHES NOMINAL IN
•
WIDTH: 1.495 INCHES NOMINAL IN
•
CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG WIDTH: 0.098 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
LEVER OFFSET DISTANCE
0.150 INCHES NOMINAL IN
MATERIAL
UNABLE TO DECODE
MOUNTING HOLE DIAMETER
0.126 INCHES MINIMUM AND 0.134 INCHES MAXIMUM IN
LENGTH
6.190 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH
0.911 INCHES NOMINAL IN
SPECIAL FEATURES
CAGE MATL ALUM. ALLOY
WIDTH
1.495 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG WIDTH
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 3L1-1?
3L1-1 is a BEARING,BALL,ANNULAR.
What parts can replace 3L1-1?
There are 3 known substitutes for 3L1-1: 6011, 6011CE1TX9, 7F2742. Substitute compatibility should be verified for your specific system.
What is the NSN for 3L1-1?
3L1-1 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-305-2943. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.