PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 3IN. TUBE-13 MHP

3IN. TUBE-13 MHP — Technical Data Sheet

✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, overall_width: 1.000 INCHES NOMINAL IN, overall_length: 5.500 INCHES NOMINAL IN, style_designator: SADDLE MOUNT, tongue_hole_type: ROUND, THREADED, loop_inside_diameter: 3.030 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System under NSN 5340-01-198-8266, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
3IN. TUBE-13 MHP
NSN: 5340-01-198-8266
FSC: 5340
CAGE: 19009 — LADISH CO TRI-CLOVER DIV (USA)
SPECIFICATIONS
materialSTEEL OVERALL
overall_width1.000 INCHES NOMINAL IN
overall_length5.500 INCHES NOMINAL IN
style_designatorSADDLE MOUNT
tongue_hole_typeROUND, THREADED
loop_inside_diameter3.030 INCHES NOMINAL IN
distance_from_loop_center_to_tongue_end2.750 INCHES NOMINAL IN
NSN5340-01-198-8266
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 3IN. TUBE-13 MHP MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: SADDLE MOUNT
•
MATERIAL: STEEL OVERALL
•
LOOP INSIDE DIAMETER: 3.030 INCHES NOMINAL IN
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 2.750 INCHES NOMINAL IN
•
TONGUE HOLE TYPE: ROUND, THREADED
TECHNICAL CHARACTERISTICS
STYLE DESIGNATORSADDLE MOUNT
MATERIALSTEEL OVERALL
OVERALL WIDTH1.000 INCHES NOMINAL IN
LOOP INSIDE DIAMETER3.030 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END2.750 INCHES NOMINAL IN
TONGUE HOLE TYPEROUND, THREADED
OVERALL LENGTH5.500 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
203352InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
3352InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
20335200InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVEGOVERNMENT REGISTRY
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 3IN. TUBE-13 MHP?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 3IN. TUBE-13 MHP?
3IN. TUBE-13 MHP is a CLAMP,LOOP.
What parts can replace 3IN. TUBE-13 MHP?
There are 3 known substitutes for 3IN. TUBE-13 MHP: 203352, 3352, 20335200. Substitute compatibility should be verified for your specific system.
What is the NSN for 3IN. TUBE-13 MHP?
3IN. TUBE-13 MHP is cataloged in the Federal Logistics Information System under NSN 5340-01-198-8266. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 3IN. TUBE-13 MHP

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: October 2026