PartsTable
Technical Data Sheet
Download PDF

3HKBZZ004-XX — BEARING,BALL,ANNULAR

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

3HKBZZ004-XX: BEARING,BALL,ANNULAR.

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL COMP 440C INNER RACE, bore_shape: STRAIGHT, bore_diameter: 0.7870 INCHES MINIMUM AND 0.7874 INCHES MAXIMUM IN, overall_width: 0.5462 INCHES MINIMUM AND 0.5512 INCHES MAXIMUM IN, load_direction: RADIAL, surface_finish: GROUND. This part is cataloged in the U.S.

Government catalog under NSN 3110-01-361-1541, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
3HKBZZ004-XX
NSN: 3110-01-361-1541
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 78118 — MPB CORPORATION DBA MPB CORP (USA)
SPECIFICATIONS
materialSTEEL COMP 440C INNER RACE
bore_shapeSTRAIGHT
bore_diameter0.7870 INCHES MINIMUM AND 0.7874 INCHES MAXIMUM IN
overall_width0.5462 INCHES MINIMUM AND 0.5512 INCHES MAXIMUM IN
seal_quantity2
load_directionRADIAL
surface_finishGROUND
style_designatorNON-LOADING GROOVE, NON-SEPARABLE
bearing_seal_typeCONTACT
overall_outside_diameter1.8499 INCHES MINIMUM AND 1.8504 INCHES MAXIMUM IN
standard_tolerance_designationABEC NO.1
NSN3110-01-361-1541
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 3HKBZZ004-XX · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BEARING SEAL TYPE: CONTACT
•
SURFACE FINISH: GROUND
•
STYLE DESIGNATOR: NON-LOADING GROOVE, NON-SEPARABLE
•
OVERALL OUTSIDE DIAMETER: 1.8499 INCHES MINIMUM AND 1.8504 INCHES MAXIMUM IN
•
BORE SHAPE: STRAIGHT
•
LOAD DIRECTION: RADIAL
•
SEAL QUANTITY: 2
TECHNICAL CHARACTERISTICS
BEARING SEAL TYPECONTACT
SURFACE FINISHGROUND
STYLE DESIGNATORNON-LOADING GROOVE, NON-SEPARABLE
OVERALL WIDTH0.5462 INCHES MINIMUM AND 0.5512 INCHES MAXIMUM IN
OVERALL OUTSIDE DIAMETER1.8499 INCHES MINIMUM AND 1.8504 INCHES MAXIMUM IN
BORE SHAPESTRAIGHT
LOAD DIRECTIONRADIAL
SEAL QUANTITY2
STANDARD TOLERANCE DESIGNATIONABEC NO.1
BORE DIAMETER0.7870 INCHES MINIMUM AND 0.7874 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 3
S204FF5G-33Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
5908699Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
204-SZZSTSame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 3HKBZZ004-XX?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 3HKBZZ004-XX?
3HKBZZ004-XX is a BEARING,BALL,ANNULAR.
What parts can replace 3HKBZZ004-XX?
There are 3 known substitutes for 3HKBZZ004-XX: S204FF5G-33, 5908699, 204-SZZST. Substitute compatibility should be verified for your specific system.
What is the NSN for 3HKBZZ004-XX?
3HKBZZ004-XX is cataloged in the U.S. Government catalog under NSN 3110-01-361-1541. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 3HKBZZ004-XX