PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 3H416
3H416 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL BALL, bore_shape: STRAIGHT, bore_diameter: 30.00 MILLIMETERS NOMINAL MM, overall_width: 1.1875 INCHES NOMINAL IN, load_direction: RADIAL, surface_finish: GROUND. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-155-6677, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
3H416
NSN: 3110-00-155-6677
FSC: 3110
CAGE: 2Y614 — LINK-BELT CRANES, L.P., LLLP (USA)
SPECIFICATIONS
materialSTEEL BALL
bore_shapeSTRAIGHT
bore_diameter30.00 MILLIMETERS NOMINAL MM
overall_width1.1875 INCHES NOMINAL IN
load_directionRADIAL
surface_finishGROUND
shield_quantity2
style_designatorNON-LOADING GROOVE, NON-SEPARABLE CARTRIDGE TYPE
lubrication_materialGREASE
overall_outside_diameter72.00 MILLIMETERS NOMINAL MM
internal_fit-up_designationSTANDARD
standard_tolerance_designationABEC NO.1
NSN3110-00-155-6677
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 3H416 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BORE DIAMETER: 30.00 MILLIMETERS NOMINAL MM
•
INTERNAL FIT-UP DESIGNATION: STANDARD
•
LUBRICATION MATERIAL: GREASE
•
STANDARD TOLERANCE DESIGNATION: ABEC NO.1
•
SHIELD QUANTITY: 2
•
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION: DOD-G-24508 MIL SPEC SINGLE MATERIAL RESPONSE
•
BORE SHAPE: STRAIGHT
•
LOAD DIRECTION: RADIAL
TECHNICAL CHARACTERISTICS (FLIS)
BORE DIAMETER30.00 MILLIMETERS NOMINAL MM
INTERNAL FIT-UP DESIGNATIONSTANDARD
LUBRICATION MATERIALGREASE
STANDARD TOLERANCE DESIGNATIONABEC NO.1
SHIELD QUANTITY2
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATIONDOD-G-24508 MIL SPEC SINGLE MATERIAL RESPONSE
BORE SHAPESTRAIGHT
LOAD DIRECTIONRADIAL
SURFACE FINISHGROUND
MATERIALSTEEL INNER RING
VERIFIED SUBSTITUTES & CROSS-REFERENCES 35
405850-53LInterchangeable
interchangeable cross-reference
interchangeable
3110PL0798150Interchangeable
interchangeable cross-reference
interchangeable
25BC33XX3MInterchangeable
interchangeable cross-reference
interchangeable
405850-76BInterchangeable
interchangeable cross-reference
interchangeable
405850-53MInterchangeable
interchangeable cross-reference
interchangeable
30BC33XSS3MInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 3H416?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 3H416?
3H416 is a BEARING,BALL,ANNULAR.
What parts can replace 3H416?
There are 35 known substitutes for 3H416: 405850-53L, 3110PL0798150, 25BC33XX3M and 32 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 3H416?
3H416 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-155-6677. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 3H416

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026