PartsTable
Technical Data Sheet
Download PDF

3G61205-101 — PIN,STRAIGHT,HEADLESS

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

3G61205-101: PIN,STRAIGHT,HEADLESS.

The PIN,STRAIGHT,HEADLESS is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, shear_strength: 220000 SINGLE POUNDS PER SQUARE INCH, surface_finish: 125.0 MICROINCHES OVERALL, first_end_style: CHAMFERED, second_end_style: SQUARE, special_features: HOLE IS COUNTERSUNK 100 DEG BY 0.135 IN. IN.

This part is cataloged in the U.S. Government catalog under NSN 5315-00-058-0849, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
3G61205-101
NSN: 5315-00-058-0849
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 98897 — LOCKHEED MARTIN CORP (USA)
SPECIFICATIONS
materialSTEEL OVERALL
shear_strength220000 SINGLE POUNDS PER SQUARE INCH
surface_finish125.0 MICROINCHES OVERALL
first_end_styleCHAMFERED
second_end_styleSQUARE
special_featuresHOLE IS COUNTERSUNK 100 DEG BY 0.135 IN. IN
pin_overall_length0.750 INCHES NOMINAL IN
first_hole_diameter0.067 INCHES NOMINAL IN
pin_overall_diameter0.1870 INCHES MINIMUM AND 0.1880 INCHES MAXIMUM IN
first_end_taper_angle15.0 DEGREES NOMINAL
first_end_taper_length0.120 INCHES NOMINAL IN
hole_arrangement_styleONE END DRILLED
NSN5315-00-058-0849
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 3G61205-101 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE FINISH: 125.0 MICROINCHES OVERALL
•
FIRST END TAPER LENGTH: 0.120 INCHES NOMINAL IN
•
HOLE ARRANGEMENT STYLE: ONE END DRILLED
•
FIRST END STYLE: CHAMFERED
•
FIRST HOLE DIAMETER: 0.067 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS6407 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
FIRST END TAPER ANGLE: 15.0 DEGREES NOMINAL
•
PIN OVERALL DIAMETER: 0.1870 INCHES MINIMUM AND 0.1880 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
SURFACE FINISH125.0 MICROINCHES OVERALL
FIRST END TAPER LENGTH0.120 INCHES NOMINAL IN
HOLE ARRANGEMENT STYLEONE END DRILLED
FIRST END STYLECHAMFERED
FIRST HOLE DIAMETER0.067 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONAMS6407 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
FIRST END TAPER ANGLE15.0 DEGREES NOMINAL
PIN OVERALL DIAMETER0.1870 INCHES MINIMUM AND 0.1880 INCHES MAXIMUM IN
PIN OVERALL LENGTH0.750 INCHES NOMINAL IN
SECOND END RELATIONSHIP WITH FIRST ENDNOT IDENTICAL
SUBSTITUTES & CROSS-REFERENCES 1
11568188Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 3G61205-101?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 3G61205-101?
3G61205-101 is a PIN,STRAIGHT,HEADLESS.
What parts can replace 3G61205-101?
There is 1 known substitute for 3G61205-101: 11568188. Substitute compatibility should be verified for your specific system.
What is the NSN for 3G61205-101?
3G61205-101 is cataloged in the U.S. Government catalog under NSN 5315-00-058-0849. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 3G61205-101

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.