PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 3D0080-3-2
3D0080-3-2 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SCREW,CLOSE TOLERANCE is a the manufacturer industrial component. Key specifications include material: TITANIUM ALLOY UNS R56400 OVERALL, head_style: FLAT COUNTERSUNK, grip_length: 0.115 INCHES MINIMUM AND 0.135 INCHES MAXIMUM IN, thread_class: 3A A, grip_diameter: 0.1890 INCHES MINIMUM AND 0.1985 INCHES MAXIMUM IN, head_diameter: 0.3206 INCHES MINIMUM AND 0.4045 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-01-334-1051, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
3D0080-3-2
NSN: 5305-01-334-1051
FSC: 5305
CAGE: 88277 — THE BOEING COMPANY (USA)
SPECIFICATIONS
materialTITANIUM ALLOY UNS R56400 OVERALL
head_styleFLAT COUNTERSUNK
grip_length0.115 INCHES MINIMUM AND 0.135 INCHES MAXIMUM IN
thread_class3A A
grip_diameter0.1890 INCHES MINIMUM AND 0.1985 INCHES MAXIMUM IN
head_diameter0.3206 INCHES MINIMUM AND 0.4045 INCHES MAXIMUM IN
thread_length0.363 INCHES NOMINAL IN
surface_finish32.0 MICROINCHES GRIP
fastener_length0.473 INCHES MINIMUM AND 0.503 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
countersink_angle129.0 DEGREES MINIMUM AND 131.0 DEGREES MAXIMUM
internal_drive_styleOFFSET CRUCIFORM (TORQUE SET)
NSN5305-01-334-1051
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 3D0080-3-2 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MINIMUM TENSILE STRENGTH: 95000 POUNDS PER SQUARE INCH LBS
•
HEAD STYLE: FLAT COUNTERSUNK
•
FASTENER LENGTH: 0.473 INCHES MINIMUM AND 0.503 INCHES MAXIMUM IN
•
SURFACE FINISH: 32.0 MICROINCHES GRIP
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 4928 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 4967 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
MATERIAL: TITANIUM ALLOY UNS R56400 OVERALL
•
GRIP DIAMETER: 0.1890 INCHES MINIMUM AND 0.1985 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
MINIMUM TENSILE STRENGTH95000 POUNDS PER SQUARE INCH LBS
HEAD STYLEFLAT COUNTERSUNK
FASTENER LENGTH0.473 INCHES MINIMUM AND 0.503 INCHES MAXIMUM IN
SURFACE FINISH32.0 MICROINCHES GRIP
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 4928 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 4967 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
SURFACE FINISH32.0 MICROINCHES THREADS
MATERIALTITANIUM ALLOY UNS R56400 OVERALL
GRIP DIAMETER0.1890 INCHES MINIMUM AND 0.1985 INCHES MAXIMUM IN
NOMINAL THREAD DIAMETER0.190 INCHES IN
THREAD DIRECTIONRIGHT-HAND
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
170132Interchangeable
interchangeable cross-reference
interchangeable
5400-740Interchangeable
interchangeable cross-reference
interchangeable
93-3-17-19-LTInterchangeable
interchangeable cross-reference
interchangeable
SYSTEM MULTICUFFInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 3D0080-3-2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 3D0080-3-2?
3D0080-3-2 is a SCREW,CLOSE TOLERANCE.
What parts can replace 3D0080-3-2?
There are 4 known substitutes for 3D0080-3-2: 170132, 5400-740, 93-3-17-19-LT and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 3D0080-3-2?
3D0080-3-2 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-01-334-1051. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 3D0080-3-2

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026