PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 3D0013-4-7
3D0013-4-7 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The BOLT,SHEAR is a the manufacturer industrial component. Key specifications include material: NICKEL ALLOY 718 OVERALL, head_style: SPLINE EXTENDED WASHER, grip_length: 0.438 INCHES NOMINAL IN, head_height: 0.250 INCHES NOMINAL IN, thread_class: 3A A, grip_diameter: 0.2485 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5306-01-411-9004, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
3D0013-4-7
NSN: 5306-01-411-9004
FSC: 5306
CAGE: 88277 — THE BOEING COMPANY (USA)
SPECIFICATIONS
materialNICKEL ALLOY 718 OVERALL
head_styleSPLINE EXTENDED WASHER
grip_length0.438 INCHES NOMINAL IN
head_height0.250 INCHES NOMINAL IN
thread_class3A A
grip_diameter0.2485 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM IN
thread_length0.592 INCHES NOMINAL IN
surface_finish32.0 MICROINCHES GRIP
fastener_length1.438 INCHES NOMINAL IN
thread_directionRIGHT-HAND
head_minor_diameter0.235 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
nominal_thread_diameter0.250 INCHES IN
NSN5306-01-411-9004
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 3D0013-4-7 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD CLASS: 3A A
•
SURFACE FINISH: 32.0 MICROINCHES GRIP
•
THREAD SERIES DESIGNATOR: UNF
•
MATERIAL: NICKEL ALLOY 718 OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS5662 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
NOMINAL THREAD DIAMETER: 0.250 INCHES IN
•
THREAD DIRECTION: RIGHT-HAND
•
FASTENER LENGTH: 1.438 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
THREAD CLASS3A A
SURFACE FINISH32.0 MICROINCHES GRIP
THREAD SERIES DESIGNATORUNF
MATERIALNICKEL ALLOY 718 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONAMS5662 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER0.250 INCHES IN
THREAD DIRECTIONRIGHT-HAND
FASTENER LENGTH1.438 INCHES NOMINAL IN
THREAD QUANTITY PER INCH28
HEAD MINOR DIAMETER0.235 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
118746Interchangeable
interchangeable cross-reference
interchangeable
00044Interchangeable
interchangeable cross-reference
interchangeable
BD07503208Interchangeable
interchangeable cross-reference
interchangeable
340847Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 3D0013-4-7?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 3D0013-4-7?
3D0013-4-7 is a BOLT,SHEAR.
What parts can replace 3D0013-4-7?
There are 4 known substitutes for 3D0013-4-7: 118746, 00044, BD07503208 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 3D0013-4-7?
3D0013-4-7 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5306-01-411-9004. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 3D0013-4-7

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026