PartsTable / COMPONENT / 3CF94
3CF94
✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING CASE, case_style: SQUARE, seal_width: 0.312 INCHES NOMINAL IN, housing_bore_diameter: 1.250 INCHES NOMINAL IN, sealing_element_style: ANGULAR, accommodated_shaft_diameter: 0.750 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-559-2713, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
3CF94
NSN: 5330-00-559-2713 FSC: 5330 CAGE: 61178 — TUTHILL CORPORATION DBA TUTHILL PUMP GROUP (USA)
SPECIFICATIONS
material STEEL CORROSION RESISTING CASE case_style SQUARE seal_width 0.312 INCHES NOMINAL IN housing_bore_diameter 1.250 INCHES NOMINAL IN sealing_element_style ANGULAR accommodated_shaft_diameter 0.750 INCHES NOMINAL IN accommodated_shaft_maximum_rated_speed 2000 FEET PER MINUTE FT NSN 5330-00-559-2713
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: 3CF94
MFR: OEM
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• SEALING ELEMENT STYLE: ANGULAR
• SEAL WIDTH: 0.312 INCHES NOMINAL IN
• HOUSING BORE DIAMETER: 1.250 INCHES NOMINAL IN
• ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 2000 FEET PER MINUTE FT
• ACCOMMODATED SHAFT DIAMETER: 0.750 INCHES NOMINAL IN
• MATERIAL: STEEL CORROSION RESISTING CASE
TECHNICAL CHARACTERISTICS (FLIS)
SEALING ELEMENT STYLE ANGULAR SEAL WIDTH 0.312 INCHES NOMINAL IN HOUSING BORE DIAMETER 1.250 INCHES NOMINAL IN CASE STYLE SQUARE ACCOMMODATED SHAFT MAXIMUM RATED SPEED 2000 FEET PER MINUTE FT ACCOMMODATED SHAFT DIAMETER 0.750 INCHES NOMINAL IN MATERIAL STEEL CORROSION RESISTING CASE MATERIAL RUBBER SYNTHETIC SEALING ELEMENT
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
101274 Interchangeable interchangeable cross-reference
interchangeable
L33008 Interchangeable interchangeable cross-reference
interchangeable
G04-041 Interchangeable interchangeable cross-reference
interchangeable
323B-28 Interchangeable interchangeable cross-reference
interchangeable
21655 Interchangeable interchangeable cross-reference
interchangeable
54054 Interchangeable interchangeable cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy 3CF94?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 3CF94?
3CF94 is a SEAL,PLAIN ENCASED.
What parts can replace 3CF94?
There are 18 known substitutes for 3CF94: 101274, L33008, G04-041 and 15 more. Substitute compatibility should be verified for your specific system.
Is 3CF94 still available?
3CF94 is currently cancelled.