PartsTable
Technical Data Sheet
Download PDF

3C4262P11 — PIN,STRAIGHT,HEADED

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

3C4262P11: PIN,STRAIGHT,HEADED.

The PIN,STRAIGHT,HEADED is a the manufacturer industrial component. Key specifications include height: 0.150 INCHES MINIMUM AND 0.170 INCHES MAXIMUM IN, diameter: 0.374 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN, material: STEEL COMP O1 OVERALL, head_style: ROUND W/WRENCH FLATS CHAMFERED, hardness_rating: 58.0 ROCKWELL C MINIMUM AND 62.0 ROCKWELL C MAXIMUM OVERALL, style_designator: STRAIGHT. This part is cataloged in the U.S.

Government catalog under NSN 5315-01-559-3664, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
3C4262P11
NSN: 5315-01-559-3664
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 07482 — GENERAL ELECTRIC COMPANY (USA)
SPECIFICATIONS
height0.150 INCHES MINIMUM AND 0.170 INCHES MAXIMUM IN
diameter0.374 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN
materialSTEEL COMP O1 OVERALL
head_styleROUND W/WRENCH FLATS CHAMFERED
hardness_rating58.0 ROCKWELL C MINIMUM AND 62.0 ROCKWELL C MAXIMUM OVERALL
special_features0.125 IN GUIDE HOLE DRILLED PARALLEL TO AXIS THRU HEAD 0.325 IN FROM AXIS; 45DEG CHAMPFER ON HEADS TOP CIRCUMFERENCE AND FLATS IN
style_designatorSTRAIGHT
pin_chamfer_angle45.0 DEGREES NOMINAL
pin_head_diameter0.900 INCHES NOMINAL IN
surface_treatmentOXIDE OVERALL
under_head_length0.180 INCHES MINIMUM AND 0.200 INCHES MAXIMUM IN
width_across_flats0.499 INCHES NOMINAL IN
NSN5315-01-559-3664
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 3C4262P11 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.499 INCHES NOMINAL IN
•
UNDER HEAD LENGTH: 0.180 INCHES MINIMUM AND 0.200 INCHES MAXIMUM IN
•
PIN CHAMFER ANGLE: 45.0 DEGREES NOMINAL
•
HARDNESS RATING: 58.0 ROCKWELL C MINIMUM AND 62.0 ROCKWELL C MAXIMUM OVERALL
•
PIN ATTACHMENT TYPE: PIN
•
STYLE DESIGNATOR: STRAIGHT
•
PIN HEAD DIAMETER: 0.900 INCHES NOMINAL IN
•
DIAMETER: 0.374 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.499 INCHES NOMINAL IN
UNDER HEAD LENGTH0.180 INCHES MINIMUM AND 0.200 INCHES MAXIMUM IN
PIN CHAMFER ANGLE45.0 DEGREES NOMINAL
HARDNESS RATING58.0 ROCKWELL C MINIMUM AND 62.0 ROCKWELL C MAXIMUM OVERALL
PIN ATTACHMENT TYPEPIN
STYLE DESIGNATORSTRAIGHT
PIN HEAD DIAMETER0.900 INCHES NOMINAL IN
DIAMETER0.374 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN
HEAD STYLEROUND W/WRENCH FLATS CHAMFERED
HEIGHT0.150 INCHES MINIMUM AND 0.170 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 1
3C4262Reference document
Same NSN cross-reference
Reference document — Drawing number reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)Demilitarization required — mutilation
Ready to buy 3C4262P11?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 3C4262P11?
3C4262P11 is a PIN,STRAIGHT,HEADED.
What parts can replace 3C4262P11?
There is 1 known substitute for 3C4262P11: 3C4262. Substitute compatibility should be verified for your specific system.
What is the NSN for 3C4262P11?
3C4262P11 is cataloged in the U.S. Government catalog under NSN 5315-01-559-3664. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 3C4262P11

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.