PartsTable
Technical Data Sheet
Download PDF

3C3532P09 — CLIP,SPRING TENSION

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

3C3532P09: CLIP,SPRING TENSION.

The CLIP,SPRING TENSION is a the manufacturer industrial component. Key specifications include length: 12.000 INCHES NOMINAL IN, material: STEEL OVERALL, prong/lip_length: 0.380 INCHES NOMINAL IN, surface_treatment: CHROMIUM OVERALL, loop_opening_width: 0.500 INCHES NOMINAL IN, material_thickness: 0.187 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-242-9003, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
3C3532P09
NSN: 5340-01-242-9003
FSC: 5340 — Hardware, Commercial
CAGE: 07482 — GENERAL ELECTRIC COMPANY (USA)
SPECIFICATIONS
length12.000 INCHES NOMINAL IN
materialSTEEL OVERALL
prong/lip_length0.380 INCHES NOMINAL IN
surface_treatmentCHROMIUM OVERALL
loop_opening_width0.500 INCHES NOMINAL IN
material_thickness0.187 INCHES NOMINAL IN
NSN5340-01-242-9003
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 3C3532P09 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH: 12.000 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.187 INCHES NOMINAL IN
•
PRONG/LIP LENGTH: 0.380 INCHES NOMINAL IN
•
LOOP OPENING WIDTH: 0.500 INCHES NOMINAL IN
•
SURFACE TREATMENT: CHROMIUM OVERALL
•
MATERIAL: STEEL OVERALL
TECHNICAL CHARACTERISTICS
LENGTH12.000 INCHES NOMINAL IN
MATERIAL THICKNESS0.187 INCHES NOMINAL IN
PRONG/LIP LENGTH0.380 INCHES NOMINAL IN
LOOP OPENING WIDTH0.500 INCHES NOMINAL IN
SURFACE TREATMENTCHROMIUM OVERALL
MATERIALSTEEL OVERALL
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
3C3532P10Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 3C3532P09?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 3C3532P09?
3C3532P09 is a CLIP,SPRING TENSION.
What parts can replace 3C3532P09?
There is 1 known substitute for 3C3532P09: 3C3532P10. Substitute compatibility should be verified for your specific system.
What is the NSN for 3C3532P09?
3C3532P09 is cataloged in the U.S. Government catalog under NSN 5340-01-242-9003. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 3C3532P09