PartsTable
Technical Data Sheet
Download PDF

399920 — PLUG,EXPANSION

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

399920: PLUG,EXPANSION.

The PLUG,EXPANSION is a the manufacturer industrial component. Key specifications include height: 0.250 INCHES MINIMUM AND 0.280 INCHES MAXIMUM IN, material: STEEL, outside_diameter: 2.224 INCHES MINIMUM AND 2.227 INCHES MAXIMUM IN, style_designator: CUP, material_thickness: 0.057 INCHES MINIMUM AND 0.063 INCHES MAXIMUM IN, material_document_and_classification: SAE 1010 ASSN STD SINGLE MATERIAL RESPONSE. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-149-7977, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
399920
NSN: 5340-01-149-7977
FSC: 5340 — Hardware, Commercial
CAGE: 3G1W3 — BOEING DISTRIBUTION SERVICES DEFENSE LLC (USA)
SPECIFICATIONS
height0.250 INCHES MINIMUM AND 0.280 INCHES MAXIMUM IN
materialSTEEL
outside_diameter2.224 INCHES MINIMUM AND 2.227 INCHES MAXIMUM IN
style_designatorCUP
material_thickness0.057 INCHES MINIMUM AND 0.063 INCHES MAXIMUM IN
material_document_and_classificationSAE 1010 ASSN STD SINGLE MATERIAL RESPONSE
NSN5340-01-149-7977
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 399920 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTSIDE DIAMETER: 2.224 INCHES MINIMUM AND 2.227 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: CUP
•
MATERIAL DOCUMENT AND CLASSIFICATION: SAE 1010 ASSN STD SINGLE MATERIAL RESPONSE
•
MATERIAL THICKNESS: 0.057 INCHES MINIMUM AND 0.063 INCHES MAXIMUM IN
•
HEIGHT: 0.250 INCHES MINIMUM AND 0.280 INCHES MAXIMUM IN
•
MATERIAL: STEEL
TECHNICAL CHARACTERISTICS
OUTSIDE DIAMETER2.224 INCHES MINIMUM AND 2.227 INCHES MAXIMUM IN
STYLE DESIGNATORCUP
MATERIAL DOCUMENT AND CLASSIFICATIONSAE 1010 ASSN STD SINGLE MATERIAL RESPONSE
MATERIAL THICKNESS0.057 INCHES MINIMUM AND 0.063 INCHES MAXIMUM IN
HEIGHT0.250 INCHES MINIMUM AND 0.280 INCHES MAXIMUM IN
MATERIALSTEEL
SUBSTITUTES & CROSS-REFERENCES 3
5340PL0863262Reference document
Same NSN cross-reference
Reference document — Informative reference only
5340011497977Reference document
Same NSN cross-reference
Reference document — Informative reference only
3999200Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 399920?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 399920?
399920 is a PLUG,EXPANSION.
What parts can replace 399920?
There are 3 known substitutes for 399920: 5340PL0863262, 5340011497977, 3999200. Substitute compatibility should be verified for your specific system.
What is the NSN for 399920?
399920 is cataloged in the U.S. Government catalog under NSN 5340-01-149-7977. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 399920