PartsTable
Technical Data Sheet
Download PDF

399.97 — FORCEPS,BONE REDUCTION

✓ Government record, cited
Clementoni · ORING SEAL
PRODUCT OVERVIEW

399.97: FORCEPS,BONE REDUCTION.

The FORCEPS,BONE REDUCTION is a Clementoni industrial component. Key specifications include material: STEEL CORROSION RESISTING OVERALL, tip_type: POINTED, jaw_length: 130.0 MILLIMETERS NOMINAL MM, special_features: POINTED JAW; RATCHETING TYPE; 103MM LGTH; FOR USE WITH 6515-01-436-1020 INSTRU. AND IMPLANT MINI-FRAGMENT SET MM, part_name_assigned_by_controlling_agency: FORCEPS REDUCTION POINTED JAW RATCHETING 130MM LG SS MM.

This part is cataloged in the U.S. Government catalog under NSN 5330-00-154-5477, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
399.97
NSN: 5330-00-154-5477
NIINs: 001545477, 003133842, 011380812, 015666327
FSC: 5330 — Packing and Gasket Materials
CAGE: 80201 — SKF USA INC. DBA SKF AEROSPACE SEALING SOLUTIONS (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING OVERALL
tip_typePOINTED
jaw_length130.0 MILLIMETERS NOMINAL MM
special_featuresPOINTED JAW; RATCHETING TYPE; 103MM LGTH; FOR USE WITH 6515-01-436-1020 INSTRU. AND IMPLANT MINI-FRAGMENT SET MM
part_name_assigned_by_controlling_agencyFORCEPS REDUCTION POINTED JAW RATCHETING 130MM LG SS MM
NSN5330-00-154-5477
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 399.97 MFR: Clementoni ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SEAL WIDTH: 0.625 INCHES NOMINAL IN
•
SEALING ELEMENT STYLE: ANGULAR
•
OUTSIDE DIAMETER: 5.256 INCHES NOMINAL IN
•
HOUSING BORE DIAMETER: 5.251 INCHES NOMINAL IN
•
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 2000 FEET PER MINUTE FT
•
CASE STYLE: SQUARE
•
ACCOMMODATED SHAFT DIAMETER: 4.000 INCHES NOMINAL IN
•
SURFACE TREATMENT: PLASTIC CASE
TECHNICAL CHARACTERISTICS
SEAL WIDTH0.625 INCHES NOMINAL IN
SEALING ELEMENT STYLEANGULAR
OUTSIDE DIAMETER5.256 INCHES NOMINAL IN
HOUSING BORE DIAMETER5.251 INCHES NOMINAL IN
ACCOMMODATED SHAFT MAXIMUM RATED SPEED2000 FEET PER MINUTE FT
CASE STYLESQUARE
ACCOMMODATED SHAFT DIAMETER4.000 INCHES NOMINAL IN
SURFACE TREATMENTPLASTIC CASE
MATERIALSTEEL CASE
MATERIALLEATHER SEALING ELEMENT
SUBSTITUTES & CROSS-REFERENCES 4
5330001545477Reference document
Same NSN cross-reference
Reference document — Informative reference only
P21004BReference document
Same NSN cross-reference
Reference document — Secondary reference
40001Reference document
Same NSN cross-reference
Reference document — Secondary reference
00044Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 399.97?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 399.97?
399.97 is a FORCEPS,BONE REDUCTION manufactured by Clementoni.
What parts can replace 399.97?
There are 4 known substitutes for 399.97: 5330001545477, P21004B, 40001 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 399.97?
399.97 is cataloged in the U.S. Government catalog under NSN 5330-00-154-5477. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 399.97