PartsTable
Technical Data Sheet
Download PDF

39813972 — O-RING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

39813972: O-RING.

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR OR RUBBER POLYESTER URETHANE CLASS AU OR RUBBER POLYETHER URETHANE CLASS EU, temp_rating: -30.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF, hardness_rating: 70.0 SHORE DUROMETER A NOMINAL, outside_diameter: 2.358 INCHES MINIMUM AND 2.404 INCHES MAXIMUM IN, center_hole_diameter: 2.165 INCHES MINIMUM AND 2.185 INCHES MAXIMUM IN, elongation_percentage: 331 MAXIMUM. This part is cataloged in the U.S.

Government catalog under NSN 5331-00-252-6052, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
39813972
NSN: 5331-00-252-6052
NIINs: 002526052, 004488148, 012855903
FSC: 5331 — O-ring
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
materialRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR OR RUBBER POLYESTER URETHANE CLASS AU OR RUBBER POLYETHER URETHANE CLASS EU
temp_rating-30.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
hardness_rating70.0 SHORE DUROMETER A NOMINAL
outside_diameter2.358 INCHES MINIMUM AND 2.404 INCHES MAXIMUM IN
center_hole_diameter2.165 INCHES MINIMUM AND 2.185 INCHES MAXIMUM IN
elongation_percentage331 MAXIMUM
cross-sectional_height0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
NSN5331-00-252-6052
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 39813972 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
•
OUTSIDE DIAMETER: 2.358 INCHES MINIMUM AND 2.404 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 2.165 INCHES MINIMUM AND 2.185 INCHES MAXIMUM IN
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
OUTSIDE DIAMETER2.358 INCHES MINIMUM AND 2.404 INCHES MAXIMUM IN
CENTER HOLE DIAMETER2.165 INCHES MINIMUM AND 2.185 INCHES MAXIMUM IN
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
SUBSTITUTES & CROSS-REFERENCES 8
25-70-139Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
10V60-141-139Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
SAE-AS29513-139Reference document
Same NSN cross-reference
Reference document — Secondary reference
7866-139Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
C-69-139Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
RT253-65-139Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Shelf-life managedNo demilitarization required
Ready to buy 39813972?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 39813972?
39813972 is a O-RING.
What parts can replace 39813972?
There are 8 known substitutes for 39813972: 25-70-139, 10V60-141-139, SAE-AS29513-139 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 39813972?
39813972 is cataloged in the U.S. Government catalog under NSN 5331-00-252-6052. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 39813972