PartsTable
Technical Data Sheet
Download PDF

3977326 — CLIP,RETAINING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

3977326: CLIP,RETAINING.

The CLIP,RETAINING is a the manufacturer industrial component. Key specifications include width: 0.322 INCHES MINIMUM AND 0.332 INCHES MAXIMUM IN, material: STEEL, overall_height: 1.283 INCHES NOMINAL IN, stock_diameter: 0.185 INCHES MINIMUM AND 0.189 INCHES MAXIMUM IN, casehardening_indicator: NOT CASEHARDENED, material_document_and_classification: G-61M,FSCM 11862 MFR REF SINGLE MATERIAL RESPONSE. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-163-6145, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
3977326
NSN: 5340-01-163-6145
FSC: 5340 — Hardware, Commercial
CAGE: 7X677 — GENERAL MOTORS LLC DBA GENERAL MOTORS LLC (USA)
SPECIFICATIONS
width0.322 INCHES MINIMUM AND 0.332 INCHES MAXIMUM IN
materialSTEEL
overall_height1.283 INCHES NOMINAL IN
stock_diameter0.185 INCHES MINIMUM AND 0.189 INCHES MAXIMUM IN
casehardening_indicatorNOT CASEHARDENED
material_document_and_classificationG-61M,FSCM 11862 MFR REF SINGLE MATERIAL RESPONSE
NSN5340-01-163-6145
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 3977326 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL DOCUMENT AND CLASSIFICATION: G-61M,FSCM 11862 MFR REF SINGLE MATERIAL RESPONSE
•
STOCK DIAMETER: 0.185 INCHES MINIMUM AND 0.189 INCHES MAXIMUM IN
•
CASEHARDENING INDICATOR: NOT CASEHARDENED
•
WIDTH: 0.322 INCHES MINIMUM AND 0.332 INCHES MAXIMUM IN
•
MATERIAL: STEEL
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT1.283 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONG-61M,FSCM 11862 MFR REF SINGLE MATERIAL RESPONSE
STOCK DIAMETER0.185 INCHES MINIMUM AND 0.189 INCHES MAXIMUM IN
CASEHARDENING INDICATORNOT CASEHARDENED
WIDTH0.322 INCHES MINIMUM AND 0.332 INCHES MAXIMUM IN
MATERIALSTEEL
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 3977326?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 3977326?
3977326 is a CLIP,RETAINING.
What is the NSN for 3977326?
3977326 is cataloged in the U.S. Government catalog under NSN 5340-01-163-6145. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 3977326