PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 397575
397575 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include hole_diameter: 0.469 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 6.375 INCHES NOMINAL IN, bolt_circle_diameter: 5.500 INCHES NOMINAL IN, outside_corner_radius: 0.438 INCHES NOMINAL IN, cross-sectional_thickness: 0.030 INCHES NOMINAL IN, cross-sectional_shape_style: SOLID SINGLE OR COMPOSITION. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-353-2613, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
397575
NSN: 5330-00-353-2613
FSC: 5330
CAGE: 65282 — WHITE MOTOR CORP (USA)
SPECIFICATIONS
hole_diameter0.469 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
overall_width6.375 INCHES NOMINAL IN
bolt_circle_diameter5.500 INCHES NOMINAL IN
outside_corner_radius0.438 INCHES NOMINAL IN
cross-sectional_thickness0.030 INCHES NOMINAL IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
side_radius_from_gasket_center3.063 INCHES NOMINAL IN
NSN5330-00-353-2613
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 397575 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.030 INCHES NOMINAL IN
•
BOLT CIRCLE DIAMETER: 5.500 INCHES NOMINAL IN
•
HOLE DIAMETER: 0.469 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
•
SIDE RADIUS FROM GASKET CENTER: 3.063 INCHES NOMINAL IN
•
OUTSIDE CORNER RADIUS: 0.438 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL THICKNESS0.030 INCHES NOMINAL IN
BOLT CIRCLE DIAMETER5.500 INCHES NOMINAL IN
HOLE DIAMETER0.469 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
OVERALL WIDTH6.375 INCHES NOMINAL IN
SIDE RADIUS FROM GASKET CENTER3.063 INCHES NOMINAL IN
OUTSIDE CORNER RADIUS0.438 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
VERIFIED SUBSTITUTES & CROSS-REFERENCES 17
F10J200Interchangeable
interchangeable cross-reference
interchangeable
3-4TA51FS200Interchangeable
interchangeable cross-reference
interchangeable
23475Interchangeable
interchangeable cross-reference
interchangeable
27276Interchangeable
interchangeable cross-reference
interchangeable
814Interchangeable
interchangeable cross-reference
interchangeable
7960Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 397575?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 397575?
397575 is a GASKET.
What parts can replace 397575?
There are 17 known substitutes for 397575: F10J200, 3-4TA51FS200, 23475 and 14 more. Substitute compatibility should be verified for your specific system.
Is 397575 still available?
397575 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 397575

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026