PartsTable
Technical Data Sheet
PartsTable / MRO / 396-001
396-001 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The CONTROL UNIT,COAXIA is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, nut_style: HEXAGON, joint_type: SCARF-PERIPHERAL PACKING, nut_height: 0.363 INCHES MINIMUM AND 0.387 INCHES MAXIMUM IN, thread_class: 2B, thread_series: UNF. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-835-2037, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 396-001
NSN: 5310-00-835-2037
FSC: 5310
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
materialSTEEL OVERALL
nut_styleHEXAGON
joint_typeSCARF-PERIPHERAL PACKING
nut_height0.363 INCHES MINIMUM AND 0.387 INCHES MAXIMUM IN
thread_class2B
thread_seriesUNF
hardness_rating95.0 ROCKWELL B MINIMUM AND 32.0 ROCKWELL C MAXIMUM
thread_directionRIGHT-HAND
surface_treatmentCADMIUM AND CHROMATE OVERALL
width_across_flats0.922 INCHES MINIMUM AND 0.938 INCHES MAXIMUM IN
nominal_thread_size0.625 INCHES IN
peripheral_diameter0.437 INCHES NOMINAL IN
NSN5310-00-835-2037
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 396-001 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD SERIES: UNF
•
THREAD QUANTITY PER INCH: 18
•
BEARING SURFACE TYPE: CHAMFERED OR WASHER FACED
•
HARDNESS RATING: 95.0 ROCKWELL B MINIMUM AND 32.0 ROCKWELL C MAXIMUM
•
NOMINAL THREAD SIZE: 0.625 INCHES IN
•
THREAD CLASS: 2B
•
NUT STYLE: HEXAGON
•
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
THREAD SERIESUNF
THREAD QUANTITY PER INCH18
BEARING SURFACE TYPECHAMFERED OR WASHER FACED
HARDNESS RATING95.0 ROCKWELL B MINIMUM AND 32.0 ROCKWELL C MAXIMUM
NOMINAL THREAD SIZE0.625 INCHES IN
THREAD CLASS2B
NUT STYLEHEXAGON
SURFACE TREATMENTCADMIUM AND CHROMATE OVERALL
NUT HEIGHT0.363 INCHES MINIMUM AND 0.387 INCHES MAXIMUM IN
MATERIALSTEEL OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 19
204781Interchangeable
interchangeable cross-reference
interchangeable
10-71214-7SInterchangeable
interchangeable cross-reference
interchangeable
CL5153Interchangeable
interchangeable cross-reference
interchangeable
2-54912-503Interchangeable
interchangeable cross-reference
interchangeable
396-00-1Interchangeable
interchangeable cross-reference
interchangeable
664HInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 396-001?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 396-001?
396-001 is a CONTROL UNIT,COAXIA. It is classified as a MRO (MRO_GENERAL).
What parts can replace 396-001?
There are 19 known substitutes for 396-001: 204781, 10-71214-7S, CL5153 and 16 more. Substitute compatibility should be verified for your specific system.
Is 396-001 still available?
396-001 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 396-001

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026