PartsTable
Technical Data Sheet
PartsTable / MRO / 396
396 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

RESISTOR,VARIABLE,NONWIRE WOUND,. Key specifications include phase: SINGLE INPUT, height: 0.094 INCHES NOMINAL IN, diameter: 0.304 INCHES MINIMUM AND 0.308 INCHES MAXIMUM IN, material: STEEL OVERALL, base_type: STATIONARY, unit_type: LEVER ACTUATED. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-9500, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 396
NSN: 3110-00-100-9500
FSC: 3110
CAGE: 47353 — PORTEC INC PIONEER DIV (USA)
SPECIFICATIONS
phaseSINGLE INPUT
height0.094 INCHES NOMINAL IN
diameter0.304 INCHES MINIMUM AND 0.308 INCHES MAXIMUM IN
materialSTEEL OVERALL
base_typeSTATIONARY
unit_typeLEVER ACTUATED
body_styleCYLINDRICAL BUSHING MOUNTED
body_width2.750 INCHES MAXIMUM IN
bore_shapeSTRAIGHT
cone_width0.8860 INCHES NOMINAL IN
gear_ratio70 TO 1
head_styleFLAT
NSN3110-00-100-9500
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 396 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
•
BORE DIAMETER: 1.9635 INCHES NOMINAL IN
•
CONE CORNER RADIUS: 0.0312 INCHES NOMINAL IN
•
CONE WIDTH: 0.8860 INCHES NOMINAL IN
•
STYLE DESIGNATOR: NORMAL ANGLE
•
MATERIAL: STEEL OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
BORE DIAMETER1.9635 INCHES NOMINAL IN
CONE CORNER RADIUS0.0312 INCHES NOMINAL IN
CONE WIDTH0.8860 INCHES NOMINAL IN
STYLE DESIGNATORNORMAL ANGLE
MATERIALSTEEL OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
396Interchangeable
interchangeable cross-reference
interchangeable
WE-1829Interchangeable
interchangeable cross-reference
interchangeable
93-401Interchangeable
interchangeable cross-reference
interchangeable
1771668Interchangeable
interchangeable cross-reference
interchangeable
1N5061AInterchangeable
interchangeable cross-reference
interchangeable
5961PL0792725Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 396?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 396?
396 is a RESISTOR,VARIABLE,NONWIRE WOUND,. It is classified as a MRO (MRO_GENERAL).
What parts can replace 396?
There are 18 known substitutes for 396: 396, WE-1829, 93-401 and 15 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 396?
396 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-9500. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 396

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026