PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 395971C
395971C ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,ROLLER,NEEDLE is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, bore_diameter: 1.2500 INCHES NOMINAL IN, overall_width: 1.7500 INCHES NOMINAL IN, alignment_type: RIGID, special_features: OIL HOLE AND GROOVE IN OUTER RACE, style_designator: NON-SEPARABLE, WITH ROLLER RETAINER, HARDENED AND GROUND. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-120-4371, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
395971C
NSN: 3110-00-120-4371
FSC: 3110
CAGE: 83299 — HYSTER-YALE GROUP, INC. DBA YALE MATERIALS HANDLING (USA)
SPECIFICATIONS
materialSTEEL OVERALL
bore_diameter1.2500 INCHES NOMINAL IN
overall_width1.7500 INCHES NOMINAL IN
alignment_typeRIGID
special_featuresOIL HOLE AND GROOVE IN OUTER RACE
style_designatorNON-SEPARABLE, WITH ROLLER RETAINER, HARDENED AND GROUND
overall_outside_diameter2.3125 INCHES NOMINAL IN
standard_tolerance_designationAFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
NSN3110-00-120-4371
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 395971C · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STANDARD TOLERANCE DESIGNATION: AFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
•
BORE DIAMETER: 1.2500 INCHES NOMINAL IN
•
STYLE DESIGNATOR: NON-SEPARABLE, WITH ROLLER RETAINER, HARDENED AND GROUND
•
MATERIAL: STEEL OVERALL
•
OVERALL OUTSIDE DIAMETER: 2.3125 INCHES NOMINAL IN
•
ALIGNMENT TYPE: RIGID
TECHNICAL CHARACTERISTICS (FLIS)
STANDARD TOLERANCE DESIGNATIONAFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
OVERALL WIDTH1.7500 INCHES NOMINAL IN
BORE DIAMETER1.2500 INCHES NOMINAL IN
STYLE DESIGNATORNON-SEPARABLE, WITH ROLLER RETAINER, HARDENED AND GROUND
MATERIALSTEEL OVERALL
OVERALL OUTSIDE DIAMETER2.3125 INCHES NOMINAL IN
ALIGNMENT TYPERIGID
SPECIAL FEATURESOIL HOLE AND GROOVE IN OUTER RACE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 28
7315Interchangeable
interchangeable cross-reference
interchangeable
315ZInterchangeable
interchangeable cross-reference
interchangeable
0607835Interchangeable
interchangeable cross-reference
interchangeable
XA327Interchangeable
interchangeable cross-reference
interchangeable
375ACDInterchangeable
interchangeable cross-reference
interchangeable
160885Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 395971C?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 395971C?
395971C is a BEARING,ROLLER,NEEDLE.
What parts can replace 395971C?
There are 28 known substitutes for 395971C: 7315, 315Z, 0607835 and 25 more. Substitute compatibility should be verified for your specific system.
Is 395971C still available?
395971C is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 395971C

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026