PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 392C
392C ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The MULTIPLIER,TORQUE WRENCH is a the manufacturer industrial component. Key specifications include criticality_code_justification: ZZZY, reference_number_differentiating_characteristics: MATERIAL WILL BE IN ACCORDANCE WITH NAVSUP-WSS ACTIVITY HX QUALITY CONTROL, MANUFACTURING AND TESTING SPECIFICATIONS. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-046-7968, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
392C
NSN: 5330-01-046-7968
FSC: 5330
CAGE: 93236 — DRESSER-RAND CO WORTHINGTON COMPRESSOR OPN A JOINT VENTURE (USA)
SPECIFICATIONS
criticality_code_justificationZZZY
reference_number_differentiating_characteristicsMATERIAL WILL BE IN ACCORDANCE WITH NAVSUP-WSS ACTIVITY HX QUALITY CONTROL, MANUFACTURING AND TESTING SPECIFICATIONS
NSN5330-01-046-7968
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 392C MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SUPPLEMENTARY FEATURES: CROSS-SECTIONAL SHAPE STYLE:NO.195 IRREGULAR SHAPE FROM FIIG A03200
TECHNICAL CHARACTERISTICS (FLIS)
SUPPLEMENTARY FEATURESCROSS-SECTIONAL SHAPE STYLE:NO.195 IRREGULAR SHAPE FROM FIIG A03200
SPECIAL FEATURESSTYLE DESIGNATOR:NO.60 IRREGULAR SHAPE FROM FIIG A03200
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
392CInterchangeable
interchangeable cross-reference
interchangeable
461-0003Interchangeable
interchangeable cross-reference
interchangeable
61-0003Interchangeable
interchangeable cross-reference
interchangeable
046-11-9779334Interchangeable
interchangeable cross-reference
interchangeable
392BInterchangeable
interchangeable cross-reference
interchangeable
392Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 392C?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 392C?
392C is a MULTIPLIER,TORQUE WRENCH.
What parts can replace 392C?
There are 8 known substitutes for 392C: 392C, 461-0003, 61-0003 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 392C?
392C is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-046-7968. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 392C

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026