PartsTable
Technical Data Sheet
Download PDF

392853-1 — HOSE,NONMETALLIC

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

392853-1: HOSE,NONMETALLIC.

The HOSE,NONMETALLIC is a the manufacturer industrial component. Key specifications include part_name_assigned_by_controlling_agency: HOSE, PLAIN. This part is cataloged in the U.S.

Government catalog under NSN 5315-00-312-4563, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
392853-1
NSN: 5315-00-312-4563
NIINs: 003124563, 014866300
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 98897 — LOCKHEED MARTIN CORP (USA)
SPECIFICATIONS
part_name_assigned_by_controlling_agencyHOSE, PLAIN
NSN5315-00-312-4563
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 392853-1 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE FINISH: 250.0 MICROINCHES BOTH ENDS
•
FIRST END TAPER LENGTH: 0.030 INCHES MINIMUM AND 0.090 INCHES MAXIMUM IN
•
FIRST END STYLE: CHAMFERED
•
FIRST END TAPER ANGLE: 55.0 DEGREES MINIMUM AND 65.0 DEGREES MAXIMUM
•
PIN OVERALL DIAMETER: 0.3062 INCHES MINIMUM AND 0.3087 INCHES MAXIMUM IN
•
PIN OVERALL LENGTH: 2.490 INCHES MINIMUM AND 2.510 INCHES MAXIMUM IN
•
SECOND END RELATIONSHIP WITH FIRST END: IDENTICAL
TECHNICAL CHARACTERISTICS
SURFACE FINISH250.0 MICROINCHES BOTH ENDS
SURFACE FINISH125.0 MICROINCHES OUTSIDE DIAMETER
FIRST END TAPER LENGTH0.030 INCHES MINIMUM AND 0.090 INCHES MAXIMUM IN
FIRST END STYLECHAMFERED
FIRST END TAPER ANGLE55.0 DEGREES MINIMUM AND 65.0 DEGREES MAXIMUM
PIN OVERALL DIAMETER0.3062 INCHES MINIMUM AND 0.3087 INCHES MAXIMUM IN
PIN OVERALL LENGTH2.490 INCHES MINIMUM AND 2.510 INCHES MAXIMUM IN
SECOND END RELATIONSHIP WITH FIRST ENDIDENTICAL
SPECIAL FEATURESCOAT WITH SOLID FILM LUBRICANT LAC G81,CLASS A
SURFACE TREATMENTCADMIUM OVERALL
SUBSTITUTES & CROSS-REFERENCES 1
5315PL1234983Reference document
Same NSN cross-reference
Reference document — Informative reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 392853-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 392853-1?
392853-1 is a HOSE,NONMETALLIC.
What parts can replace 392853-1?
There is 1 known substitute for 392853-1: 5315PL1234983. Substitute compatibility should be verified for your specific system.
What is the NSN for 392853-1?
392853-1 is cataloged in the U.S. Government catalog under NSN 5315-00-312-4563. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 392853-1

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.