PartsTable
Technical Data Sheet
Download PDF

39234-1 — NUT,SLEEVE

✓ Government record, cited
Hypertec · NUT WASHER
PRODUCT OVERVIEW

39234-1: NUT,SLEEVE.

The NUT,SLEEVE is a Hypertec industrial component. Key specifications include material: PLASTIC POLYHEXAMETHYLENE ADIPAMIDE OVERALL, nut_style: SLEEVE, nut_length: 0.305 INCHES MINIMUM AND 0.315 INCHES MAXIMUM IN, nut_diameter: 0.250 INCHES NOMINAL IN, thread_class: 2B, thread_length: 0.250 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-129-7613, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
39234-1
NSN: 5310-01-129-7613
FSC: 5310 — Nuts and Washers
CAGE: 09344 — ROCKWELL COLLINS, INC. DBA RC DISPLAYS SYSTEMS (USA)
SPECIFICATIONS
materialPLASTIC POLYHEXAMETHYLENE ADIPAMIDE OVERALL
nut_styleSLEEVE
nut_length0.305 INCHES MINIMUM AND 0.315 INCHES MAXIMUM IN
nut_diameter0.250 INCHES NOMINAL IN
thread_class2B
thread_length0.250 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
thread_seriesUNIFIED NATIONAL COARSE (UNC)
thread_directionRIGHT-HAND
nominal_thread_size0.112 INCHES IN
cross-sectional_shapeROUND NUT
thread_quantity_per_inch40
material_document_and_classificationL-P-410 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN5310-01-129-7613
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 39234-1 · Hypertec ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
NUT LENGTH: 0.305 INCHES MINIMUM AND 0.315 INCHES MAXIMUM IN
•
THREAD SERIES: UNIFIED NATIONAL COARSE (UNC)
•
THREAD LENGTH: 0.250 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: L-P-410 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.112 INCHES IN
•
NUT DIAMETER: 0.250 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE: ROUND NUT
TECHNICAL CHARACTERISTICS
NUT LENGTH0.305 INCHES MINIMUM AND 0.315 INCHES MAXIMUM IN
THREAD SERIESUNIFIED NATIONAL COARSE (UNC)
THREAD LENGTH0.250 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
MATERIAL DOCUMENT AND CLASSIFICATIONL-P-410 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.112 INCHES IN
NUT DIAMETER0.250 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPEROUND NUT
NUT STYLESLEEVE
THREAD CLASS2B
SUBSTITUTES & CROSS-REFERENCES 1
10109544Reference document
Same NSN cross-reference
Reference document — Informative reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 39234-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 39234-1?
39234-1 is a NUT,SLEEVE manufactured by Hypertec.
What parts can replace 39234-1?
There is 1 known substitute for 39234-1: 10109544. Substitute compatibility should be verified for your specific system.
What is the NSN for 39234-1?
39234-1 is cataloged in the U.S. Government catalog under NSN 5310-01-129-7613. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 39234-1

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.