PartsTable
Technical Data Sheet
Download PDF

391 5816 — PIN,GROOVED,HEADLESS

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

391 5816: PIN,GROOVED,HEADLESS.

The PIN,GROOVED,HEADLESS is a the manufacturer industrial component. Key specifications include diameter: 8.0 MILLIMETERS NOMINAL MM, overall_length: 31.9 MILLIMETERS MINIMUM AND 32.1 MILLIMETERS MAXIMUM MM, surface_finish: 1.0 MICRONS OUTSIDE DIAMETER, undercut_width: 1.0 MILLIMETERS MINIMUM AND 1.1 MILLIMETERS MAXIMUM MM, first_end_style: CHAMFERED, effective_length: 15.9 MILLIMETERS MINIMUM AND 26.1 MILLIMETERS MAXIMUM MM. This part is cataloged in the U.S.

Government catalog under NSN 5315-01-158-6338, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
391 5816
NSN: 5315-01-158-6338
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 34914 — HIAB USA INC (USA)
SPECIFICATIONS
diameter8.0 MILLIMETERS NOMINAL MM
overall_length31.9 MILLIMETERS MINIMUM AND 32.1 MILLIMETERS MAXIMUM MM
surface_finish1.0 MICRONS OUTSIDE DIAMETER
undercut_width1.0 MILLIMETERS MINIMUM AND 1.1 MILLIMETERS MAXIMUM MM
first_end_styleCHAMFERED
effective_length15.9 MILLIMETERS MINIMUM AND 26.1 MILLIMETERS MAXIMUM MM
second_end_styleSQUARE
style_designatorGROOVE
undercut_diameter6.0 MILLIMETERS NOMINAL MM
first_end_locationCHAMFERED END
first_end_taper_angle45.0 DEGREES NOMINAL
second_undercut_width1.0 MILLIMETERS MINIMUM AND 1.1 MILLIMETERS MAXIMUM MM
NSN5315-01-158-6338
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 391 5816 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE FINISH: 1.0 MICRONS OUTSIDE DIAMETER
•
UNDERCUT WIDTH: 1.0 MILLIMETERS MINIMUM AND 1.1 MILLIMETERS MAXIMUM MM
•
FIRST END TAPER LENGTH: 0.5 MILLIMETERS NOMINAL MM
•
UNDERCUT DIAMETER: 6.0 MILLIMETERS NOMINAL MM
•
FIRST END LOCATION: CHAMFERED END
•
FIRST END STYLE: CHAMFERED
•
STYLE DESIGNATOR: GROOVE
•
DIAMETER: 8.0 MILLIMETERS NOMINAL MM
TECHNICAL CHARACTERISTICS
SURFACE FINISH1.0 MICRONS OUTSIDE DIAMETER
UNDERCUT WIDTH1.0 MILLIMETERS MINIMUM AND 1.1 MILLIMETERS MAXIMUM MM
FIRST END TAPER LENGTH0.5 MILLIMETERS NOMINAL MM
UNDERCUT DIAMETER6.0 MILLIMETERS NOMINAL MM
FIRST END LOCATIONCHAMFERED END
FIRST END STYLECHAMFERED
STYLE DESIGNATORGROOVE
DIAMETER8.0 MILLIMETERS NOMINAL MM
OVERALL LENGTH31.9 MILLIMETERS MINIMUM AND 32.1 MILLIMETERS MAXIMUM MM
FIRST END TAPER ANGLE45.0 DEGREES NOMINAL
SUBSTITUTES & CROSS-REFERENCES 3
4HC303Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
390 5853Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
15012629Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 391 5816?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 391 5816?
391 5816 is a PIN,GROOVED,HEADLESS.
What parts can replace 391 5816?
There are 3 known substitutes for 391 5816: 4HC303, 390 5853, 15012629. Substitute compatibility should be verified for your specific system.
What is the NSN for 391 5816?
391 5816 is cataloged in the U.S. Government catalog under NSN 5315-01-158-6338. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 391 5816