PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 3901014
3901014 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: RUBBER SILICONE CLASS Q SEALING ELEMENT, case_style: RECESSED, seal_width: 0.585 INCHES NOMINAL IN, attachment_method: CEMENTED, housing_bore_diameter: 4.874 INCHES NOMINAL IN, sealing_element_style: VERTICAL. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-229-5318, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
3901014
NSN: 5330-00-229-5318
FSC: 5330
CAGE: 24617 — GENERAL MOTORS CORP (USA)
SPECIFICATIONS
materialRUBBER SILICONE CLASS Q SEALING ELEMENT
case_styleRECESSED
seal_width0.585 INCHES NOMINAL IN
attachment_methodCEMENTED
housing_bore_diameter4.874 INCHES NOMINAL IN
sealing_element_styleVERTICAL
accommodated_shaft_diameter3.625 INCHES NOMINAL IN
NSN5330-00-229-5318
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 3901014 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: RUBBER SILICONE CLASS Q SEALING ELEMENT
•
SEAL WIDTH: 0.585 INCHES NOMINAL IN
•
ACCOMMODATED SHAFT DIAMETER: 3.625 INCHES NOMINAL IN
•
SEALING ELEMENT STYLE: VERTICAL
•
HOUSING BORE DIAMETER: 4.874 INCHES NOMINAL IN
•
CASE STYLE: RECESSED
•
ATTACHMENT METHOD: CEMENTED
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALRUBBER SILICONE CLASS Q SEALING ELEMENT
SEAL WIDTH0.585 INCHES NOMINAL IN
ACCOMMODATED SHAFT DIAMETER3.625 INCHES NOMINAL IN
SEALING ELEMENT STYLEVERTICAL
HOUSING BORE DIAMETER4.874 INCHES NOMINAL IN
CASE STYLERECESSED
ATTACHMENT METHODCEMENTED
VERIFIED SUBSTITUTES & CROSS-REFERENCES 16
5453 1/2Interchangeable
interchangeable cross-reference
interchangeable
V00000851Interchangeable
interchangeable cross-reference
interchangeable
5453 1/2 IN.Interchangeable
interchangeable cross-reference
interchangeable
5453Interchangeable
interchangeable cross-reference
interchangeable
61-67Interchangeable
interchangeable cross-reference
interchangeable
5310L20-002Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 3901014?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 3901014?
3901014 is a SEAL,PLAIN ENCASED.
What parts can replace 3901014?
There are 16 known substitutes for 3901014: 5453 1/2, V00000851, 5453 1/2 IN. and 13 more. Substitute compatibility should be verified for your specific system.
Is 3901014 still available?
3901014 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 3901014

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026