PartsTable
Technical Data Sheet
Download PDF

38H6D12C110-11 — BEARING,BALL,DUPLEX

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

38H6D12C110-11: BEARING,BALL,DUPLEX.

The BEARING,BALL,DUPLEX is a the manufacturer industrial component. Key specifications include bore_diameter: 8.0 MILLIMETERS NOMINAL MM, overall_width: 14.0 MILLIMETERS NOMINAL MM, load_direction: ANGULAR, surface_finish: GROUND, internal_clearance: 0.0008 INCHES MINIMUM RADIAL AND 0.0011 INCHES MAXIMUM RADIAL IN, bearing_preload_rating: 12.0 POUNDS NOMINAL LBS. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-005-2200, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
38H6D12C110-11
NSN: 3110-00-005-2200
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 70854 — SCHAEFFLER AEROSPACE USA CORP DIV SCHAEFFLER AEROSPACE USA CORPORATION (USA)
SPECIFICATIONS
bore_diameter8.0 MILLIMETERS NOMINAL MM
overall_width14.0 MILLIMETERS NOMINAL MM
load_directionANGULAR
surface_finishGROUND
internal_clearance0.0008 INCHES MINIMUM RADIAL AND 0.0011 INCHES MAXIMUM RADIAL IN
bearing_preload_rating12.0 POUNDS NOMINAL LBS
calibration_designatorC11
overall_outside_diameter22.0 MILLIMETERS NOMINAL MM
standard_tolerance_designationABEC NO.7
material_document_and_classificationUNABLE TO DECODE
lubrication_material_document_and_classificationMIL-L-6085 MIL SPEC SINGLE MATERIAL RESPONSE
NSN3110-00-005-2200
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 38H6D12C110-11 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BEARING PRELOAD RATING: 12.0 POUNDS NOMINAL LBS
•
INTERNAL CLEARANCE: 0.0008 INCHES MINIMUM RADIAL AND 0.0011 INCHES MAXIMUM RADIAL IN
•
SURFACE FINISH: GROUND
•
MATERIAL DOCUMENT AND CLASSIFICATION: UNABLE TO DECODE
•
OVERALL OUTSIDE DIAMETER: 22.0 MILLIMETERS NOMINAL MM
•
LOAD DIRECTION: ANGULAR
•
STANDARD TOLERANCE DESIGNATION: ABEC NO.7
TECHNICAL CHARACTERISTICS
BEARING PRELOAD RATING12.0 POUNDS NOMINAL LBS
INTERNAL CLEARANCE0.0008 INCHES MINIMUM RADIAL AND 0.0011 INCHES MAXIMUM RADIAL IN
SURFACE FINISHGROUND
MATERIAL DOCUMENT AND CLASSIFICATIONUNABLE TO DECODE
OVERALL WIDTH14.0 MILLIMETERS NOMINAL MM
OVERALL OUTSIDE DIAMETER22.0 MILLIMETERS NOMINAL MM
LOAD DIRECTIONANGULAR
STANDARD TOLERANCE DESIGNATIONABEC NO.7
BORE DIAMETER8.0 MILLIMETERS NOMINAL MM
CALIBRATION DESIGNATORC11
SUBSTITUTES & CROSS-REFERENCES 1
339073Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 38H6D12C110-11?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 38H6D12C110-11?
38H6D12C110-11 is a BEARING,BALL,DUPLEX.
What parts can replace 38H6D12C110-11?
There is 1 known substitute for 38H6D12C110-11: 339073. Substitute compatibility should be verified for your specific system.
What is the NSN for 38H6D12C110-11?
38H6D12C110-11 is cataloged in the U.S. Government catalog under NSN 3110-00-005-2200. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 38H6D12C110-11

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.