PartsTable / COMPONENT / 38G97
38G97
✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The GASKET is a the manufacturer industrial component. Key specifications include hole_diameter: 0.531 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 14.750 INCHES NOMINAL IN, overall_length: 15.750 INCHES NOMINAL IN, special_features: FOUR BOLT HOLES 0.656 IN. DIA IN, cross-sectional_thickness: 0.015 INCHES NOMINAL IN.
This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-353-2630, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
38G97
NSN: 5330-00-353-2630 FSC: 5330 CAGE: 45152 — OSHKOSH CORP (USA)
SPECIFICATIONS
hole_diameter 0.531 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN overall_width 14.750 INCHES NOMINAL IN overall_length 15.750 INCHES NOMINAL IN special_features FOUR BOLT HOLES 0.656 IN. DIA IN bolt_hole_quantity 8 cross-sectional_thickness 0.015 INCHES NOMINAL IN NSN 5330-00-353-2630
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: 38G97
MFR: OEM
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• CROSS-SECTIONAL THICKNESS: 0.015 INCHES NOMINAL IN
• HOLE DIAMETER: 0.531 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL THICKNESS 0.015 INCHES NOMINAL IN HOLE DIAMETER 0.531 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN OVERALL LENGTH 15.750 INCHES NOMINAL IN OVERALL WIDTH 14.750 INCHES NOMINAL IN SPECIAL FEATURES FOUR BOLT HOLES 0.656 IN. DIA IN BOLT HOLE QUANTITY 8
VERIFIED SUBSTITUTES & CROSS-REFERENCES 16
53572 Interchangeable interchangeable cross-reference
interchangeable
941 1-1/8 Interchangeable interchangeable cross-reference
interchangeable
S209 Interchangeable interchangeable cross-reference
interchangeable
A29270 Interchangeable interchangeable cross-reference
interchangeable
29270 Interchangeable interchangeable cross-reference
interchangeable
1065585-13 Interchangeable interchangeable cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy 38G97?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 38G97?
38G97 is a GASKET.
What parts can replace 38G97?
There are 16 known substitutes for 38G97: 53572, 941 1-1/8, S209 and 13 more. Substitute compatibility should be verified for your specific system.
Is 38G97 still available?
38G97 is currently cancelled.