PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 38FSFQ5A7N078GR
38FSFQ5A7N078GR ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL SHIELD, bore_shape: STRAIGHT, bore_diameter: 8.00 MILLIMETERS NOMINAL MM, overall_width: 0.4060 INCHES NOMINAL IN, load_direction: RADIAL, surface_finish: GROUND. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-156-3393, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
38FSFQ5A7N078GR
NSN: 3110-00-156-3393
FSC: 3110
CAGE: 38443 — SKF USA INC. (USA)
SPECIFICATIONS
materialSTEEL SHIELD
bore_shapeSTRAIGHT
bore_diameter8.00 MILLIMETERS NOMINAL MM
overall_width0.4060 INCHES NOMINAL IN
seal_quantity1
load_directionRADIAL
surface_finishGROUND
shield_quantity1
inner_ring_width0.3860 INCHES NOMINAL IN
outer_ring_width0.3150 INCHES NOMINAL IN
lubrication_materialGREASE
overall_outside_diameter22.00 MILLIMETERS NOMINAL MM
NSN3110-00-156-3393
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 38FSFQ5A7N078GR · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: STEEL SHIELD
•
SHIELD QUANTITY: 1
•
STANDARD TOLERANCE DESIGNATION: ABEC NO.1
•
SURFACE FINISH: GROUND
•
INNER RING WIDTH: 0.3860 INCHES NOMINAL IN
•
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-3545 MIL SPEC SINGLE MATERIAL RESPONSE
•
OUTER RING WIDTH: 0.3150 INCHES NOMINAL IN
•
INTERNAL FIT-UP DESIGNATION: STANDARD
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALSTEEL SHIELD
SHIELD QUANTITY1
STANDARD TOLERANCE DESIGNATIONABEC NO.1
SURFACE FINISHGROUND
INNER RING WIDTH0.3860 INCHES NOMINAL IN
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATIONMIL-G-3545 MIL SPEC SINGLE MATERIAL RESPONSE
OUTER RING WIDTH0.3150 INCHES NOMINAL IN
INTERNAL FIT-UP DESIGNATIONSTANDARD
BORE SHAPESTRAIGHT
LUBRICATION MATERIALGREASE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 28
PA1104HGInterchangeable
interchangeable cross-reference
interchangeable
1001-042Interchangeable
interchangeable cross-reference
interchangeable
73B10017Interchangeable
interchangeable cross-reference
interchangeable
45285Interchangeable
interchangeable cross-reference
interchangeable
B-28Interchangeable
interchangeable cross-reference
interchangeable
1781-0875Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 38FSFQ5A7N078GR?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 38FSFQ5A7N078GR?
38FSFQ5A7N078GR is a BEARING,BALL,ANNULAR.
What parts can replace 38FSFQ5A7N078GR?
There are 28 known substitutes for 38FSFQ5A7N078GR: PA1104HG, 1001-042, 73B10017 and 25 more. Substitute compatibility should be verified for your specific system.
Is 38FSFQ5A7N078GR still available?
38FSFQ5A7N078GR is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 38FSFQ5A7N078GR

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026