PartsTable
Technical Data Sheet
PartsTable / STORAGE_HDD / 3890AS004800
3890AS004800 ✓ Verified by PartsTable
— · STORAGE_HDD · 3.5_SATA_HDD
WHAT YOU NEED TO KNOW
SAS backplane supports SATA, not vice versa NL-SAS = SAS protocol at nearline (7.2K) speed — NOT SATA
Gen8 LFF tray ≠ Gen10 tray — different screw holes
PRODUCT OVERVIEW

IBM 36.4GB 10k SCSI 80pin HDD 3.5. Key specifications include material: STEEL CASE, body_width: 2.250 INCHES MINIMUM AND 2.375 INCHES MAXIMUM IN, case_style: SQUARE, seal_width: 0.375 INCHES NOMINAL IN, total_head: 1.500 FEET FT, body_height: 3.688 INCHES MINIMUM AND 3.812 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 1710-01-695-8403, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
STORAGE_HDD→ 3.5_SATA_HDD→ 3890AS004800
NSN: 1710-01-695-8403
FSC: 1710
CAGE: 30003 — NAVAL AIR SYSTEMS COMMAND MANAGED ORIGINAL DESIGN ACTIVITY NOT MATERIAL/PARTS SUPPLIER (USA)
SPECIFICATIONS
materialSTEEL CASE
body_width2.250 INCHES MINIMUM AND 2.375 INCHES MAXIMUM IN
case_styleSQUARE
seal_width0.375 INCHES NOMINAL IN
total_head1.500 FEET FT
body_height3.688 INCHES MINIMUM AND 3.812 INCHES MAXIMUM IN
body_length2.625 INCHES MINIMUM AND 2.750 INCHES MAXIMUM IN
suction_lift25.000 FEET FT
inclosure_typeHERMETICALLY SEALED
overall_height4.375 INCHES NOMINAL IN
overall_length2.561 INCHES MINIMUM AND 2.750 INCHES MAXIMUM IN
long_arm_length2.406 INCHES MINIMUM AND 2.594 INCHES MAXIMUM IN
NSN1710-01-695-8403
COMPONENT DIAGRAM
RELEASE LATCH 36.4GB NL-SAS 10K RPM 3890AS004800 OEM NL-SAS INTERFACE INTERPOSER SAS drive in SATA tray? Check board compatibility 3.5" (101.6 x 146mm) LFF 3.5" DRIVE | 36.4GB | NL-SAS 10K RPM NL-SAS uses SAS protocol at 7.2K RPM | SAS backplane supports SATA, not reverse Tray generation matters | Gen8 LFF tray differs from Gen10 TITLE LFF 3.5" DRIVE PN 3890AS004800 MFR OEM
KEY FEATURES
•
36.4GB Capacity
•
10K RPM Speed
TYPICAL APPLICATIONS
  • Enterprise storage arrays and SANs
  • Direct-attached storage (DAS) expansion
  • Database tier storage (OLTP, OLAP)
  • Virtual machine datastore expansion
  • Backup-to-disk and disaster recovery targets
  • Content delivery and media streaming storage
VERIFIED SUBSTITUTES & CROSS-REFERENCES 12
50594Interchangeable
interchangeable cross-reference
interchangeable
8132Interchangeable
interchangeable cross-reference
interchangeable
82221HInterchangeable
interchangeable cross-reference
interchangeable
6136Interchangeable
IBM 36.4GB 10k SCSI 80pin HDD 3.5
interchangeable
8109404Interchangeable
interchangeable cross-reference
interchangeable
9630-11Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 3890AS004800?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 3890AS004800?
3890AS004800 is a IBM 36.4GB 10k SCSI 80pin HDD 3.5. It is classified as a STORAGE_HDD (3.5_SATA_HDD).
What parts can replace 3890AS004800?
There are 12 known substitutes for 3890AS004800: 50594, 8132, 82221H and 9 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 3890AS004800?
3890AS004800 is cataloged in the Federal Logistics Information System (FLIS) under NSN 1710-01-695-8403. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 3890AS004800

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026