PartsTable
Technical Data Sheet
Download PDF

38634 — BOOT,DUST AND MOISTURE SEAL

✓ Government record, cited
Cellularline · TAPERED BEARING
PRODUCT OVERVIEW

38634: BOOT,DUST AND MOISTURE SEAL.

Impact Glass is a layer of real tempered glass that protects your display in the best way possible and keeps its characteristics unchanged. A special treatment maximises the brightness of HD screens and the sensitivity of the touchscreen. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-100-3553, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
38634
NSN: 3110-00-100-3553
NIINs: 001003553, 001877571, 006440110, 006482429, 014715641
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 54123 — COLSON CORP THE (USA)
SPECIFICATIONS
height2.000 INCHES NOMINAL IN
materialRUBBER SILICONE BODY
body_width1.688 INCHES NOMINAL IN
cone_width1.0000 INCHES NOMINAL IN
body_height2.500 INCHES MAXIMUM IN
body_length3.000 INCHES NOMINAL IN
dome_height0.791 INCHES NOMINAL IN
load_rating90.0 POUNDS MAXIMUM LBS
flange_width2.750 INCHES NOMINAL IN
thread_class2B
bore_diameter1.6250 INCHES NOMINAL IN
flange_length4.750 INCHES NOMINAL IN
NSN3110-00-100-3553
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 38634 · Cellularline ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: NORMAL ANGLE
•
CONE CORNER RADIUS: 0.1406 INCHES NOMINAL IN
•
CONE WIDTH: 1.0000 INCHES NOMINAL IN
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
•
BORE DIAMETER: 1.6250 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
TECHNICAL CHARACTERISTICS
STYLE DESIGNATORNORMAL ANGLE
CONE CORNER RADIUS0.1406 INCHES NOMINAL IN
CONE WIDTH1.0000 INCHES NOMINAL IN
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
BORE DIAMETER1.6250 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
SUBSTITUTES & CROSS-REFERENCES 6
26882Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
K26882Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
0209899-4Reference document
Same NSN cross-reference
Reference document — Secondary reference
0BT26882Reference document
Same NSN cross-reference
Reference document — Secondary reference
209899Reference document
Same NSN cross-reference
Reference document — Secondary reference
BT26882Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 38634?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 38634?
38634 is a BOOT,DUST AND MOISTURE SEAL manufactured by Cellularline.
What parts can replace 38634?
There are 6 known substitutes for 38634: 26882, K26882, 0209899-4 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 38634?
38634 is cataloged in the U.S. Government catalog under NSN 3110-00-100-3553. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 38634