PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 3862J10
3862J10 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The COVER,ACCESS is a the manufacturer industrial component. Key specifications include material: STEEL, body_thickness: 0.062 INCHES NOMINAL IN, inside_diameter: 2.812 INCHES NOMINAL IN, flange_thickness: 0.062 INCHES NOMINAL IN, outside_diameter: 3.003 INCHES NOMINAL IN, special_features: 3/16 RADIUS BEND OUTSIDE,5132 FROM OPEN END. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-310-1914, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
3862J10
NSN: 5340-00-310-1914
FSC: 5340
CAGE: 3D6E9 — MERITOR INDUSTRIAL PRODUCTS, LLC (USA)
SPECIFICATIONS
materialSTEEL
body_thickness0.062 INCHES NOMINAL IN
inside_diameter2.812 INCHES NOMINAL IN
flange_thickness0.062 INCHES NOMINAL IN
outside_diameter3.003 INCHES NOMINAL IN
special_features3/16 RADIUS BEND OUTSIDE,5132 FROM OPEN END
inside_corner_radius0.438 INCHES NOMINAL IN
securing_device_typeSPRING CLIP
peripheral_shape_styleROUND, NO HOLES
first_recess_inside_height1.312 INCHES NOMINAL IN
cross-sectional_shape_styleCIRCULAR RECESS
NSN5340-00-310-1914
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 3862J10 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL SHAPE STYLE: CIRCULAR RECESS
•
OUTSIDE DIAMETER: 3.003 INCHES NOMINAL IN
•
PERIPHERAL SHAPE STYLE: ROUND, NO HOLES
•
BODY THICKNESS: 0.062 INCHES NOMINAL IN
•
SECURING DEVICE TYPE: SPRING CLIP
•
INSIDE DIAMETER: 2.812 INCHES NOMINAL IN
•
FLANGE THICKNESS: 0.062 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL SHAPE STYLECIRCULAR RECESS
OUTSIDE DIAMETER3.003 INCHES NOMINAL IN
SPECIAL FEATURES3/16 RADIUS BEND OUTSIDE,5132 FROM OPEN END
PERIPHERAL SHAPE STYLEROUND, NO HOLES
BODY THICKNESS0.062 INCHES NOMINAL IN
SECURING DEVICE TYPESPRING CLIP
INSIDE DIAMETER2.812 INCHES NOMINAL IN
FLANGE THICKNESS0.062 INCHES NOMINAL IN
FIRST RECESS INSIDE HEIGHT1.312 INCHES NOMINAL IN
INSIDE CORNER RADIUS0.438 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 9
5361-1Interchangeable
interchangeable cross-reference
interchangeable
INVOLUTE 32-1Interchangeable
interchangeable cross-reference
interchangeable
MS15701-433Interchangeable
interchangeable cross-reference
interchangeable
R500Interchangeable
Ruckus ZoneFlex R500 Dual-Band 802.11ac Access Point
interchangeable
11014778Interchangeable
interchangeable cross-reference
interchangeable
655-441/5Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 3862J10?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 3862J10?
3862J10 is a COVER,ACCESS.
What parts can replace 3862J10?
There are 9 known substitutes for 3862J10: 5361-1, INVOLUTE 32-1, MS15701-433 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 3862J10?
3862J10 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-310-1914. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 3862J10

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026