PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 385700
385700 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SCREW,WOOD is a the manufacturer industrial component. Key specifications include head_style: FLAT COUNTERSUNK, head_diameter: 0.292 INCHES MINIMUM AND 0.332 INCHES MAXIMUM IN, fastener_length: 0.703 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN, special_features: MATERIAL - BRASS ALLOY 260 OR BRASS ALLOY 268 OR BRASS ALLOY 270 OVERALL; THREAD: 15 THREADS PER INCH, countersink_angle: 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM, internal_drive_style: CROSS RECESS TYPE 1. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-901-3793, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
385700
NSN: 5305-00-901-3793
FSC: 5305
CAGE: 2S125 — HILLMAN GROUP, INC., THE (USA)
SPECIFICATIONS
head_styleFLAT COUNTERSUNK
head_diameter0.292 INCHES MINIMUM AND 0.332 INCHES MAXIMUM IN
fastener_length0.703 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
special_featuresMATERIAL - BRASS ALLOY 260 OR BRASS ALLOY 268 OR BRASS ALLOY 270 OVERALL; THREAD: 15 THREADS PER INCH
countersink_angle80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
internal_drive_styleCROSS RECESS TYPE 1
nonmachine_thread_styleGIMLET POINT (TYPE A, AB OR BA)
nondefinitive_spec/std_data1 TYPE
nonmachine_nominal_thread_diameter0.164 INCHES IN
material_document_and_classificationASTM-B16 ASSN STD SINGLE MATERIAL RESPONSE OR ASTM-B36 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NSN5305-00-901-3793
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 385700 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
NONDEFINITIVE SPEC/STD DATA: 1 TYPE
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM-B16 ASSN STD SINGLE MATERIAL RESPONSE OR ASTM-B36 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
HEAD DIAMETER: 0.292 INCHES MINIMUM AND 0.332 INCHES MAXIMUM IN
•
COUNTERSINK ANGLE: 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
•
INTERNAL DRIVE STYLE: CROSS RECESS TYPE 1
•
HEAD STYLE: FLAT COUNTERSUNK
•
NONMACHINE NOMINAL THREAD DIAMETER: 0.164 INCHES IN
TECHNICAL CHARACTERISTICS (FLIS)
NONDEFINITIVE SPEC/STD DATA1 TYPE
MATERIAL DOCUMENT AND CLASSIFICATIONASTM-B16 ASSN STD SINGLE MATERIAL RESPONSE OR ASTM-B36 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
HEAD DIAMETER0.292 INCHES MINIMUM AND 0.332 INCHES MAXIMUM IN
COUNTERSINK ANGLE80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
INTERNAL DRIVE STYLECROSS RECESS TYPE 1
HEAD STYLEFLAT COUNTERSUNK
NONMACHINE NOMINAL THREAD DIAMETER0.164 INCHES IN
SPECIAL FEATURESMATERIAL - BRASS ALLOY 260 OR BRASS ALLOY 268 OR BRASS ALLOY 270 OVERALL; THREAD: 15 THREADS PER INCH
NONMACHINE THREAD STYLEGIMLET POINT (TYPE A, AB OR BA)
FASTENER LENGTH0.703 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 19
ANSI B18.6.1Interchangeable
interchangeable cross-reference
interchangeable
FF-S-111 TY1ST2CInterchangeable
interchangeable cross-reference
interchangeable
MS35492-80Interchangeable
interchangeable cross-reference
interchangeable
149367Interchangeable
interchangeable cross-reference
interchangeable
FF-S-111Interchangeable
interchangeable cross-reference
interchangeable
MIL-S-971Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 385700?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 385700?
385700 is a SCREW,WOOD.
What parts can replace 385700?
There are 19 known substitutes for 385700: ANSI B18.6.1, FF-S-111 TY1ST2C, MS35492-80 and 16 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 385700?
385700 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-901-3793. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 385700

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026