PartsTable
Technical Data Sheet
Download PDF

38570-1 — BEARING,SLEEVE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

38570-1: BEARING,SLEEVE.

The BEARING,SLEEVE is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, corner_shape: SQUARE ALL CORNERS, flange_width: 0.6000 INCHES NOMINAL IN, overall_length: 0.2000 INCHES NOMINAL IN, style_designator: HEXAGON SHAPED FLANGE, EXTERNAL FLANGE ONE END, surface_treatment: PASSIVATE OVERALL. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-901-3794, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
38570-1
NSN: 5305-00-901-3794
NIINs: 009013794, 013840838
FSC: 5305 — Screws
CAGE: 2S125 — HILLMAN GROUP, INC., THE (USA)
SPECIFICATIONS
materialSTEEL OVERALL
corner_shapeSQUARE ALL CORNERS
flange_width0.6000 INCHES NOMINAL IN
overall_length0.2000 INCHES NOMINAL IN
style_designatorHEXAGON SHAPED FLANGE, EXTERNAL FLANGE ONE END
surface_treatmentPASSIVATE OVERALL
width_across_flats0.3800 INCHES NOMINAL IN
body_inside_diameter0.1580 INCHES NOMINAL IN
body_outside_diameter0.2170 INCHES NOMINAL IN
end_item_identificationPACER DAWN
flange_outside_diameter0.3800 INCHES NOMINAL IN
surface_treatment_document_and_classificationQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
NSN5305-00-901-3794
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 38570-1 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
NONMACHINE NOMINAL THREAD DIAMETER: 0.164 INCHES IN
•
FASTENER LENGTH: 0.828 INCHES MINIMUM AND 0.875 INCHES MAXIMUM IN
•
NONMACHINE THREAD STYLE: GIMLET POINT (TYPE A, AB OR BA)
•
HEAD STYLE: FLAT COUNTERSUNK
•
INTERNAL DRIVE STYLE: CROSS RECESS TYPE 1
•
COUNTERSINK ANGLE: 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
•
HEAD DIAMETER: 0.292 INCHES MINIMUM AND 0.332 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
NONMACHINE NOMINAL THREAD DIAMETER0.164 INCHES IN
FASTENER LENGTH0.828 INCHES MINIMUM AND 0.875 INCHES MAXIMUM IN
NONMACHINE THREAD STYLEGIMLET POINT (TYPE A, AB OR BA)
HEAD STYLEFLAT COUNTERSUNK
SPECIAL FEATURESBRASS ALLOY
INTERNAL DRIVE STYLECROSS RECESS TYPE 1
COUNTERSINK ANGLE80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
HEAD DIAMETER0.292 INCHES MINIMUM AND 0.332 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 2
MS35492-252Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
ANSI B18.6.1Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 38570-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 38570-1?
38570-1 is a BEARING,SLEEVE.
What parts can replace 38570-1?
There are 2 known substitutes for 38570-1: MS35492-252, ANSI B18.6.1. Substitute compatibility should be verified for your specific system.
What is the NSN for 38570-1?
38570-1 is cataloged in the U.S. Government catalog under NSN 5305-00-901-3794. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 38570-1