PartsTable
Technical Data Sheet
Download PDF

38567 — BOLT,MACHINE

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

38567: BOLT,MACHINE.

The BOLT,MACHINE is a the manufacturer industrial component. Key specifications include material: STEEL PROPERTY CLASS 8.8 OVERALL, special_features: MATERIAL 8.8 CARBON STEEL, end_item_identification: CROP FLATRACK, PALLETIZED, M3A1 BY HYUNDAI, NSN: 3990-01-442-2751. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-741-1881, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
38567
NSN: 5310-00-741-1881
NIINs: 007411881, 007531844, 011044281, 014754087
FSC: 5310 — Nuts and Washers
CAGE: 44197 — SAINT-GOBAIN ABRASIVES INC (USA)
SPECIFICATIONS
materialSTEEL PROPERTY CLASS 8.8 OVERALL
special_featuresMATERIAL 8.8 CARBON STEEL
end_item_identificationCROP FLATRACK, PALLETIZED, M3A1 BY HYUNDAI, NSN: 3990-01-442-2751
NSN5310-00-741-1881
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 38567 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
TOP RECESS DIAMETER: 1.399 INCHES MINIMUM AND 1.413 INCHES MAXIMUM IN
•
BOTTOM RECESS DIAMETER: 1.399 INCHES MINIMUM AND 1.413 INCHES MAXIMUM IN
•
TOP RECESS ANGLE: 90.0 DEGREES NOMINAL
•
STYLE DESIGNATOR: RECESSED BOTH SIDES
•
OUTSIDE DIAMETER: 2.305 INCHES MINIMUM AND 2.319 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.149 INCHES MINIMUM AND 0.163 INCHES MAXIMUM IN
•
BOTTOM RECESS ANGLE: 90.0 DEGREES NOMINAL
•
MATERIAL: STEEL OVERALL
TECHNICAL CHARACTERISTICS
TOP RECESS DIAMETER1.399 INCHES MINIMUM AND 1.413 INCHES MAXIMUM IN
BOTTOM RECESS DIAMETER1.399 INCHES MINIMUM AND 1.413 INCHES MAXIMUM IN
TOP RECESS ANGLE90.0 DEGREES NOMINAL
STYLE DESIGNATORRECESSED BOTH SIDES
OUTSIDE DIAMETER2.305 INCHES MINIMUM AND 2.319 INCHES MAXIMUM IN
MATERIAL THICKNESS0.149 INCHES MINIMUM AND 0.163 INCHES MAXIMUM IN
BOTTOM RECESS ANGLE90.0 DEGREES NOMINAL
MATERIALSTEEL OVERALL
HOLE DIAMETER1.368 INCHES MINIMUM AND 1.382 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 1
927394Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
No demilitarization required
Ready to buy 38567?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 38567?
38567 is a BOLT,MACHINE.
What parts can replace 38567?
There is 1 known substitute for 38567: 927394. Substitute compatibility should be verified for your specific system.
What is the NSN for 38567?
38567 is cataloged in the U.S. Government catalog under NSN 5310-00-741-1881. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 38567

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.