PartsTable
Technical Data Sheet
Download PDF

3849917 — CLEVIS,ROD END

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

3849917: CLEVIS,ROD END.

The CLEVIS,ROD END is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, end_radius: 0.25 INCHES NOMINAL IN, fork_depth: 0.469 INCHES NOMINAL IN, hole_shape: ROUND, shank_length: 0.359 INCHES NOMINAL IN, hole_diameter: 0.25 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-612-3718, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
3849917
NSN: 5340-01-612-3718
FSC: 5340 — Hardware, Commercial
CAGE: 75Q65 — OSHKOSH DEFENSE LLC (USA)
SPECIFICATIONS
materialSTEEL OVERALL
end_radius0.25 INCHES NOMINAL IN
fork_depth0.469 INCHES NOMINAL IN
hole_shapeROUND
shank_length0.359 INCHES NOMINAL IN
hole_diameter0.25 INCHES NOMINAL IN
overall_width0.641 INCHES NOMINAL IN
overall_height0.531 INCHES NOMINAL IN
shank_diameter0.391 INCHES NOMINAL IN
fork_span_width0.25 INCHES NOMINAL IN
special_featuresINTERNAL THREAD 0.25-28
style_designatorCLEVIS
NSN5340-01-612-3718
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 3849917 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SHANK DIAMETER: 0.391 INCHES NOMINAL IN
•
FORK SPAN WIDTH: 0.25 INCHES NOMINAL IN
•
FORK ARM THICKNESS: 0.125 INCHES NOMINAL IN
•
END RADIUS: 0.25 INCHES NOMINAL IN
•
SHANK LENGTH: 0.359 INCHES NOMINAL IN
•
STYLE DESIGNATOR: CLEVIS
TECHNICAL CHARACTERISTICS
SHANK DIAMETER0.391 INCHES NOMINAL IN
OVERALL HEIGHT0.531 INCHES NOMINAL IN
FORK SPAN WIDTH0.25 INCHES NOMINAL IN
FORK ARM THICKNESS0.125 INCHES NOMINAL IN
END RADIUS0.25 INCHES NOMINAL IN
SHANK LENGTH0.359 INCHES NOMINAL IN
STYLE DESIGNATORCLEVIS
OVERALL WIDTH0.641 INCHES NOMINAL IN
HOLE SHAPEROUND
SPECIAL FEATURESINTERNAL THREAD 0.25-28
SUBSTITUTES & CROSS-REFERENCES 1
2447K13Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 3849917?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 3849917?
3849917 is a CLEVIS,ROD END.
What parts can replace 3849917?
There is 1 known substitute for 3849917: 2447K13. Substitute compatibility should be verified for your specific system.
What is the NSN for 3849917?
3849917 is cataloged in the U.S. Government catalog under NSN 5340-01-612-3718. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 3849917

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.