PartsTable
Technical Data Sheet
Download PDF

384769 — BRACKET,ANGLE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

384769: BRACKET,ANGLE.

The BRACKET,ANGLE is a the manufacturer industrial component. Key specifications include material: STEEL COMP 410, first_leg_angle: 90.0 DEGREES NOMINAL, first_leg_style: CORNER RADIUS, first_leg_width: 1.420 INCHES MINIMUM AND 1.451 INCHES MAXIMUM IN, first_leg_length: 1.180 INCHES MINIMUM AND 1.200 INCHES MAXIMUM IN, second_leg_style: END RADIUS AND TAPERED. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-657-0774, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
384769
NSN: 5340-00-657-0774
FSC: 5340 — Hardware, Commercial
CAGE: 77445 — RTX CORPORATION DBA PRATT & WHITNEY DIV PRATT &WHITNEY (USA)
SPECIFICATIONS
materialSTEEL COMP 410
first_leg_angle90.0 DEGREES NOMINAL
first_leg_styleCORNER RADIUS
first_leg_width1.420 INCHES MINIMUM AND 1.451 INCHES MAXIMUM IN
first_leg_length1.180 INCHES MINIMUM AND 1.200 INCHES MAXIMUM IN
second_leg_styleEND RADIUS AND TAPERED
second_leg_width1.760 INCHES NOMINAL IN
style_designatorANGLE
second_leg_length1.391 INCHES MINIMUM AND 1.423 INCHES MAXIMUM IN
mounting_hole_typePLAIN
first_leg_thickness0.115 INCHES MINIMUM AND 0.135 INCHES MAXIMUM IN
second_leg_thickness0.115 INCHES MINIMUM AND 0.135 INCHES MAXIMUM IN
NSN5340-00-657-0774
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 384769 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.359 INCHES MINIMUM AND 0.391 INCHES MAXIMUM IN
•
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.297 INCHES MINIMUM AND 0.328 INCHES MAXIMUM IN
•
FIRST LEG HOLE DIAMETER: 0.339 INCHES MINIMUM AND 0.349 INCHES MAXIMUM IN
•
FIRST LEG ANGLE: 90.0 DEGREES NOMINAL
•
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH: 1.123 INCHES NOMINAL IN
•
SECOND LEG RELATIONSHIP TO FIRST LEG: NOT IDENTICAL
•
SECOND LEG HOLE DIAMETER: 0.214 INCHES NOMINAL IN
•
FIRST LEG CORNER RADIUS: 0.297 INCHES MINIMUM AND 0.328 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH0.359 INCHES MINIMUM AND 0.391 INCHES MAXIMUM IN
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH0.297 INCHES MINIMUM AND 0.328 INCHES MAXIMUM IN
FIRST LEG HOLE DIAMETER0.339 INCHES MINIMUM AND 0.349 INCHES MAXIMUM IN
FIRST LEG ANGLE90.0 DEGREES NOMINAL
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH1.123 INCHES NOMINAL IN
SECOND LEG RELATIONSHIP TO FIRST LEGNOT IDENTICAL
SECOND LEG HOLE DIAMETER0.214 INCHES NOMINAL IN
FIRST LEG CORNER RADIUS0.297 INCHES MINIMUM AND 0.328 INCHES MAXIMUM IN
SECOND LEG WIDTH1.760 INCHES NOMINAL IN
SECOND LEG LENGTH1.391 INCHES MINIMUM AND 1.423 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 384769?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 384769?
384769 is a BRACKET,ANGLE.
What is the NSN for 384769?
384769 is cataloged in the U.S. Government catalog under NSN 5340-00-657-0774. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 384769

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.