38417: DIAPHRAGM,VALVE,FLAT.
Extends DisplayPort 1.2 signals up to 1200m over a single duplex LC cable Supports resolutions up to 4K UHD 3840x2160@60Hz Uncompressed transmission for lossless video output HDCP and EDID pass-through to ensure maximum compatibility 2 year warranty The Lindy 1200m Fibre Optic DisplayPort 1.2 Extender is the professional solution for extending DP 1.2 signals over increased distances, not possible with traditional copper-based systems, using a single standard LC duplex singlemode (9/125µm) fibre optic cable. Support for the DisplayPort 1.2 specification allows for the transmission of highly detailed 4K UHD resolutions, without any compression, ensuring content is visually lossless at the display side. Video content can be seen with enhanced brightness, greater contrasts and a much wider colour gamut, perfect for creating eye-catching digital signage in retail, viewing detailed information in real time operation centres or when delivering engaging and immersive This part is cataloged in the U.S.
Government catalog under NSN 5961-00-147-7494, indicating validated use in U.S. government and defense logistics supply chains.
| material | PLASTIC POLYTETRAFLUOROETHYLENE OVERALL |
| joint_type | SCARF-PERIPHERAL RETAINER |
| overall_width | 1.050 INCHES MAXIMUM IN |
| overall_height | 0.450 INCHES MAXIMUM IN |
| overall_length | 1.573 INCHES MAXIMUM IN |
| mounting_method | TERMINAL AND UNTHREADED HOLE(S) |
| terminal_length | 0.312 INCHES MINIMUM IN |
| features_provided | HERMETICALLY SEALED CASE |
| center_hole_diameter | 2.953 INCHES MINIMUM AND 2.957 INCHES MAXIMUM IN |
| cross-sectional_height | 0.050 INCHES MINIMUM AND 0.052 INCHES MAXIMUM IN |
| internal_configuration | JUNCTION CONTACT |
| semiconductor_material | SILICON |
| NSN | 5961-00-147-7494 |
| OVERALL HEIGHT | 0.450 INCHES MAXIMUM IN |
| VOLTAGE RATING IN VOLTS PER CHARACTERISTIC | 120.0 MAXIMUM COLLECTOR TO BASE VOLTAGE/STATIC/EMITTER OPEN AND 75.0 MAXIMUM COLLECTOR TO EMITTER VOLTAGE/STATIC/BASE OPEN |
| MAXIMUM OPERATING TEMP PER MEASUREMENT POINT | 200.0 CELSIUS JUNCTION DEGC |
| MOUNTING FACILITY QUANTITY | 2 |
| JOINT ELECTRONIC DEVICE ENGINEERING COUNCIL/JEDEC/CASE OUTLINE DESIGNATION | TO-3 |
| TERMINAL LENGTH | 0.312 INCHES MINIMUM IN |
| MOUNTING METHOD | TERMINAL AND UNTHREADED HOLE(S) |
| INTERNAL JUNCTION CONFIGURATION | NPN |
| SEMICONDUCTOR MATERIAL | SILICON |
| OVERALL LENGTH | 1.573 INCHES MAXIMUM IN |