PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 383112
383112 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.199 INCHES NOMINAL IN, material: ALUMINUM BONDING STRIP, lug_width: 1.000 INCHES NOMINAL IN, overall_width: 0.625 INCHES NOMINAL IN, style_designator: LEFT HAND CLAMP & BRACKET, tongue_hole_type: ROUND, UNTHREADED. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-200-6557, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
383112
NSN: 5340-00-200-6557
FSC: 5340
CAGE: 31550 — L3HARRIS TECHNOLOGIES, INC. DBA HARRIS CORPORATION (USA)
SPECIFICATIONS
diameter0.199 INCHES NOMINAL IN
materialALUMINUM BONDING STRIP
lug_width1.000 INCHES NOMINAL IN
overall_width0.625 INCHES NOMINAL IN
style_designatorLEFT HAND CLAMP & BRACKET
tongue_hole_typeROUND, UNTHREADED
lug_hole_diameter0.199 INCHES NOMINAL IN
material_thickness0.051 INCHES NOMINAL IN
loop_inside_diameter0.563 INCHES NOMINAL IN
distance_from_loop_center_to_tongue_end0.953 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_lug_hole0.719 INCHES NOMINAL IN
center_to_center_distance_between_first_and_second_holes0.500 INCHES NOMINAL IN
NSN5340-00-200-6557
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 383112 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LUG WIDTH: 1.000 INCHES NOMINAL IN
•
MATERIAL: ALUMINUM BAND
•
LOOP INSIDE DIAMETER: 0.563 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.051 INCHES NOMINAL IN
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 0.953 INCHES NOMINAL IN
•
CENTER TO CENTER DISTANCE BETWEEN FIRST AND SECOND HOLES: 0.500 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
LUG WIDTH1.000 INCHES NOMINAL IN
MATERIALALUMINUM BAND
LOOP INSIDE DIAMETER0.563 INCHES NOMINAL IN
MATERIAL THICKNESS0.051 INCHES NOMINAL IN
LUG WIDTH1.000 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END0.953 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN FIRST AND SECOND HOLES0.500 INCHES NOMINAL IN
MATERIALALUMINUM BONDING STRIP
LUG HOLE DIAMETER0.199 INCHES NOMINAL IN
STYLE DESIGNATORLEFT HAND CLAMP & BRACKET
VERIFIED SUBSTITUTES & CROSS-REFERENCES 9
2D56Interchangeable
interchangeable cross-reference
interchangeable
112262H1Interchangeable
interchangeable cross-reference
interchangeable
FC2678Interchangeable
interchangeable cross-reference
interchangeable
770-9Interchangeable
interchangeable cross-reference
interchangeable
077099Interchangeable
interchangeable cross-reference
interchangeable
7709N020S-1-2Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 383112?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 383112?
383112 is a CLAMP,LOOP.
What parts can replace 383112?
There are 9 known substitutes for 383112: 2D56, 112262H1, FC2678 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 383112?
383112 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-200-6557. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 383112

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026