PartsTable
Technical Data Sheet
Download PDF

3829086 — BRACKET,ANGLE

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

3829086: BRACKET,ANGLE.

The BRACKET,ANGLE is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, nut_style: HEXAGON, nut_height: 0.320 INCHES MINIMUM AND 0.377 INCHES MAXIMUM IN, lubrication: DRY FILM LUBRICANT, temp_rating: 850.0 FAHRENHEIT MINIMUM DEGF, thread_class: 2B. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-126-9404, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
3829086
NSN: 5310-01-126-9404
NIINs: 011269404, 015772032
FSC: 5310 — Nuts and Washers
CAGE: 11862 — GENERAL MOTORS CORP CHEVROLET MOTOR DIV SPECIAL PRODUCTS DEPT (USA)
SPECIFICATIONS
materialSTEEL OVERALL
nut_styleHEXAGON
nut_height0.320 INCHES MINIMUM AND 0.377 INCHES MAXIMUM IN
lubricationDRY FILM LUBRICANT
temp_rating850.0 FAHRENHEIT MINIMUM DEGF
thread_class2B
thread_seriesUNIFIED NATIONAL COARSE (UNC)
hardness_rating28.0 ROCKWELL C MAXIMUM
locking_featurePREVAILING TORQUE ALL METAL DESIGN
thread_directionRIGHT-HAND
surface_treatmentCADMIUM OVERALL
width_across_flats0.5510 INCHES MINIMUM AND 0.5645 INCHES MAXIMUM IN
NSN5310-01-126-9404
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 3829086 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LUBRICATION: DRY FILM LUBRICANT
•
WIDTH ACROSS FLATS: 0.5510 INCHES MINIMUM AND 0.5645 INCHES MAXIMUM IN
•
BEARING SURFACE FINISH: 110.0 MICROINCHES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: GM 4341-M CODE 20,FSCM 24617 MFR REF SINGLE TREATMENT RESPONSE OVERALL
•
THREAD SERIES: UNIFIED NATIONAL COARSE (UNC)
•
TEMP RATING: 850.0 FAHRENHEIT MINIMUM DEGF
•
HARDNESS RATING: 28.0 ROCKWELL C MAXIMUM
•
MATERIAL DOCUMENT AND CLASSIFICATION: GM 301-M,FSCM 24617 MFR REF SINGLE MATERIAL RESPONSE OVERALL
TECHNICAL CHARACTERISTICS
LUBRICATIONDRY FILM LUBRICANT
WIDTH ACROSS FLATS0.5510 INCHES MINIMUM AND 0.5645 INCHES MAXIMUM IN
BEARING SURFACE FINISH110.0 MICROINCHES
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONGM 4341-M CODE 20,FSCM 24617 MFR REF SINGLE TREATMENT RESPONSE OVERALL
THREAD SERIESUNIFIED NATIONAL COARSE (UNC)
TEMP RATING850.0 FAHRENHEIT MINIMUM DEGF
HARDNESS RATING28.0 ROCKWELL C MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATIONGM 301-M,FSCM 24617 MFR REF SINGLE MATERIAL RESPONSE OVERALL
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.375 INCHES IN
SUBSTITUTES & CROSS-REFERENCES 3
5310PL0820866Reference document
Same NSN cross-reference
Reference document — Informative reference only
9422297Reference document
Same NSN cross-reference
Reference document — Secondary reference
9422277Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 3829086?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 3829086?
3829086 is a BRACKET,ANGLE.
What parts can replace 3829086?
There are 3 known substitutes for 3829086: 5310PL0820866, 9422297, 9422277. Substitute compatibility should be verified for your specific system.
What is the NSN for 3829086?
3829086 is cataloged in the U.S. Government catalog under NSN 5310-01-126-9404. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 3829086

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.