The LINDY Wireless Extender for HDMI extends Full HD 1080p signals up to 20m*, without compression or perceptible latency, just as if you were using a cable!<br><br>Using a MIMO 5GHz radio the WHDI Wireless Extender provides full support for HD 1080p, HDCP, multi-channel audio and IR remote control and can easily be used with our range of HDMI Switchers, Splitters and Matrix Switches. Installation is simple, just plug and play, no configuration, tuning or adjustment is required. For added convenience the Wireless Extender incorporates a switching splitter which allows 2 HDMI source devices to be connected to the extender.
The selected input is then displayed via the local HDMI output and the Wireless output simultaneously. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-156-7526, indicating validated use in U.S. government and defense logistics supply chains.
| angle | 22.0 DEGREES |
| material | STEEL |
| body_width | 2.625 INCHES NOMINAL IN |
| bore_shape | STRAIGHT |
| block_width | 0.5 INCHES NOMINAL IN |
| body_height | 1.625 INCHES NOMINAL IN |
| body_length | 3.250 INCHES NOMINAL IN |
| thread_class | 2A NUT THREAD A |
| bore_diameter | 20.00 MILLIMETERS NOMINAL MM |
| contact_angle | 25.0 DEGREES MINIMUM |
| largest_width | 0.156 INCHES SINGLE END IN |
| overall_width | 0.312 INCHES IN |
| NSN | 3110-00-156-7526 |
| SURFACE FINISH | GROUND |
| STYLE DESIGNATOR | COUNTERBORED OUTER RING, NON-SEPARABLE |
| MATERIAL | STEEL BALL |
| MATERIAL | STEEL OUTER RING |
| MATERIAL | STEEL INNER RING |
| STANDARD TOLERANCE DESIGNATION | ABEC NO.1 |
| BORE DIAMETER | 20.00 MILLIMETERS NOMINAL MM |
| OVERALL OUTSIDE DIAMETER | 52.00 MILLIMETERS NOMINAL MM |
| CONTACT ANGLE | 25.0 DEGREES MINIMUM |
| BORE SHAPE | STRAIGHT |