PartsTable
Technical Data Sheet
Download PDF

3811-70-071-5990 — CLAMP,LOOP

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

3811-70-071-5990: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.250 INCHES NOMINAL IN, material: STEEL BAND, loop_width: 5.250 INCHES NOMINAL IN, loop_length: 5.250 INCHES NOMINAL IN, overall_width: 0.625 INCHES NOMINAL IN, special_features: COLOR ALOVE DRAB. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-167-4275, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
3811-70-071-5990
NSN: 5340-00-167-4275
FSC: 5340 — Hardware, Commercial
CAGE: 25567 — THE GORMAN-RUPP COMPANY DIV GORMAN-RUPP (USA)
SPECIFICATIONS
diameter0.250 INCHES NOMINAL IN
materialSTEEL BAND
loop_width5.250 INCHES NOMINAL IN
loop_length5.250 INCHES NOMINAL IN
overall_width0.625 INCHES NOMINAL IN
special_featuresCOLOR ALOVE DRAB
style_designatorRECTANGULAR
tongue_hole_typeROUND, UNTHREADED
surface_treatmentPAINT BAND
material_thickness0.062 INCHES NOMINAL IN
NSN5340-00-167-4275
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 3811-70-071-5990 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LOOP WIDTH: 5.250 INCHES NOMINAL IN
•
STYLE DESIGNATOR: RECTANGULAR
•
DIAMETER: 0.250 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.062 INCHES NOMINAL IN
•
SURFACE TREATMENT: PAINT BAND
•
TONGUE HOLE TYPE: ROUND, UNTHREADED
TECHNICAL CHARACTERISTICS
LOOP WIDTH5.250 INCHES NOMINAL IN
STYLE DESIGNATORRECTANGULAR
DIAMETER0.250 INCHES NOMINAL IN
OVERALL WIDTH0.625 INCHES NOMINAL IN
MATERIAL THICKNESS0.062 INCHES NOMINAL IN
SPECIAL FEATURESCOLOR ALOVE DRAB
SURFACE TREATMENTPAINT BAND
TONGUE HOLE TYPEROUND, UNTHREADED
MATERIALSTEEL BAND
LOOP LENGTH5.250 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
38117-007-130-00Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 3811-70-071-5990?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 3811-70-071-5990?
3811-70-071-5990 is a CLAMP,LOOP.
What parts can replace 3811-70-071-5990?
There is 1 known substitute for 3811-70-071-5990: 38117-007-130-00. Substitute compatibility should be verified for your specific system.
What is the NSN for 3811-70-071-5990?
3811-70-071-5990 is cataloged in the U.S. Government catalog under NSN 5340-00-167-4275. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 3811-70-071-5990