PartsTable
Technical Data Sheet
Download PDF

381102 — CONE AND ROLLERS,TAPERED ROLLER

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

381102: CONE AND ROLLERS,TAPERED ROLLER.

CONE AND ROLLERS,TAPERED ROLLER. Key specifications include end_item_identification: ALS SIMULATOR PART NUMBER 205-05050, part_name_assigned_by_controlling_agency: STRAP SET,HEAD SKIN. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-926-1379, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
381102
NSN: 3110-00-926-1379
NIINs: 009261379, 015442936
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 31509 — LANNEX LTD (USA)
SPECIFICATIONS
end_item_identificationALS SIMULATOR PART NUMBER 205-05050
part_name_assigned_by_controlling_agencySTRAP SET,HEAD SKIN
NSN3110-00-926-1379
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 381102 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: NORMAL ANGLE
•
CONE CORNER RADIUS: 0.1400 INCHES NOMINAL IN
•
CONE WIDTH: 0.5800 INCHES NOMINAL IN
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
•
BORE DIAMETER: 1.0625 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS
STYLE DESIGNATORNORMAL ANGLE
CONE CORNER RADIUS0.1400 INCHES NOMINAL IN
CONE WIDTH0.5800 INCHES NOMINAL IN
SPECIAL FEATURESDUTY L CLASS SERIES
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
BORE DIAMETER1.0625 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
SUBSTITUTES & CROSS-REFERENCES 7
44820Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
L44649Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
BMA263Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
C1216Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
8017Reference document
Same NSN cross-reference
Reference document — Secondary reference
093706Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 381102?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 381102?
381102 is a CONE AND ROLLERS,TAPERED ROLLER.
What parts can replace 381102?
There are 7 known substitutes for 381102: 44820, L44649, BMA263 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 381102?
381102 is cataloged in the U.S. Government catalog under NSN 3110-00-926-1379. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 381102